[rallyhub]

Here are some photos of the making of the intersection.
It is recommended to apply a drop of superglue under the braids on the MDF track right next to the slits.
This prevents the connection between the braids and the MDF track from loosening.
Wherever the braids disappear through a slot, a drop of superglue is applied to the track surface, next to the slit.
Underneath the intersection, the crossing braids are separated by a small MDF separating board, which is glued to the first two braids and the MDF track.
Thereafter the crossing braids followed. They cannot make contact with the two already glued braids due to the separating board (short circuit).


       
The intersection slits have been filed.                                                                                     The double-sided adhesive tape has been added.

       
A drop of superglue in the area between the double-sided adhesive tape and the slit.                 The braids are now sufficiently glued to the track.