[woodcote]

The cars are now available on the SRC website for pre-order, with delivery from 26 October. The SRC-54001 racing Chrono version here and the SRC-04001 high-detail Original version here. The price is 85,95 Euros for either version. Pre-orders get the option of a fancy SRC Lancia S4 t-shirt for an extra 5 Euros. Shipping is worldwide.

The specs for the Chrono car are listed as:

• 1 x Universal chassis
  
• 1 x M3/N motor + 1 x 9z Pinion (RM0301)
  
• 2 x 2×4 zn motor screws
  
• 2 x CHRONO 75mm cables + 2 x terminals + 2 x 22mm braids
  
• 1 x “REVOLUTION” T2 guide + 1 x T1 guide spring + 1 x 580/318 spacer + 1 x 1.8 × 6 screw
  
• 2 x 53mm axle + 1 x T1A “REVOLUTION” pulley + 1 x A1 pulley
  
• 4 x lightened rims with type 1 hubcap “RM0611”
  
• 1 x crown 27z aluminum RM0401
  
• 1 x 56mm strap + 4 x 1,8 × 6 screws + (2 + 2) shock absorber stops + 4 x rods (REVOLUTION)
  
• 2 x T1 Middle springs (front axle) + 2 x T2 Middle springs (rear axle)
  
• 2 “front special bearings” + 2 x double rally bearings
  
• 2 x “Black Pat” tire “RN0104”
  
• 2 x MAX100 “RN0115” rear tire
  
• 2 x “SUPREMEX 3” chassis – body bolt (1.8 x 10mm)
  
• Accessories bag: 1 x antenna
  

And the Original...

• 1 x Universal chassis
  
• 1 x M3/N motor + 1 x 9z Pinion (RM0301)
  
• 2 x 2×4 zn motor screws
  
• 2 x 75mm cables + 2 x terminals + 2 x 22mm braids
  
• 1 x guide T2 black + 1 x guide spring T2 + 1 x washer 580/318 + 1 x screw 1.8 × 6
  
• 2 x 53mm axle + 1 x T1A pulley + 1 x A1 pulley
  
• 4 x aluminium rims with type 4 rear and type 3 front studs and hubcaps
  
• 1 x crown 27z bronze «RM0402»
  
• 1 x strap 56mm
  
• 2 x 1.8 x 6 front screws +2 x 1.8 × 8 rear screws + (2 + 2) shock absorber bumpers + 4 x rods
  
• 2 x T2 soft springs (front axle) + 2 x T2 hard springs (rear axle)
  
• 2 “front special bearing” + 2 x double rally bearings
  
• 2 x MTN82 front tire (RN0113)
  
• 2 x MTX82 rear tire (RN0111)
  
• 2 x chassis screw – body (1.8 x 6mm)
  
• 1 x Accessories bag: 1 x antenna; 1 + 1 x auxiliary headlights