Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
I've always disliked magnets in HO cars. Now it doesn't matter if the car has traction magnets or not. Unless of course they make wood magnets.
This is on a 3' by 7' foot base. The track is 3/8" inch MDF. Burnishing is next followed by wiring and power.
The track should have power later today. I look forward to running a few laps. MicroScalex cars with braids will be the first test cars. I need to install braids on everything that doesn't already have them. HO proxy racing here with Andy got me started installing braids on HO cars.
Thank you very kindly for looking.
Ken
Posts: 2,366
Threads: 106
Likes Received: 2,457 in 1,154 posts
Likes Given: 7,835
Joined: Mar 2019
Location Farlington, North Yorkshire, UK
Brilliant. What a great little layout.
Posts: 4,560
Threads: 147
Likes Received: 3,082 in 1,830 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Great track Ken.
Is there room for two 1/32 cars?
Life is like a box of Slot cars...
Posts: 532
Threads: 50
Likes Received: 891 in 359 posts
Likes Given: 2,704
Joined: Jun 2020
Great looking track Ken
That will be a blast to run some quick laps on, have fun!
Pip
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
(11th-Feb-24, 12:33 PM)Kevan Wrote: Great track Ken.
Is there room for two 1/32 cars?
Thank you very kindly to everyone for the positive comments.
Kevan. The track is too narrow for 1/32. But it's slightly wider than normal HO. 1/43 should be a tight fit, but also work. I have a bunch of 1/43 cars too.
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
The track lives!
I asked the builder for a bit more lane spacing than regular HO. You can still take the other guy out in a corner if needed.
1/43 cars are about an 1/8th of an inch apart. It doesn't get any closer. It's NUTS!
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
Here's how the 1/43 cars look on the track. Spacing is close. However, you can pass if you don't mind clipping the guy next to you a little.
I had to change the plastic guide pins to 3/32" dia steel rod. I also had to add lead weight since the magnets don't do anything. Now the cars are fast(er)!
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,167
Joined: Sep 2020
Location A small igloo in Canada
(This post was last modified: 16th-Nov-25, 09:03 PM by
KensRedZed.)
Posts: 884
Threads: 51
Likes Received: 2,391 in 711 posts
Likes Given: 2,652
Joined: Apr 2019
Location The Netherlands
Hi Ken,
Very nice and smooth track. Will you also add some scenery?
Hub