Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Touring Cars Slotting Proxy
#71

- removed post as class specs changed during the making of the post -

Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#72

- also removed -

Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#73

Graham, Do I read that as:

Class A constructed cars - any chassis on Resin moulded bodies fitted with Class A motors
Class B constructed cars - any chassis on Resin moulded bodies fitted with Class B motors
Class C constructed cars - any chassis on Plastic moulded bodies


It may be a good idea to ditch the U/O sub-classes as there's six different classes in Event 1 and six different classes in Event 2

Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#74

(8th-Mar-23, 08:54 PM)Kevan Wrote:  Graham, Do I read that as:

Class A constructed cars - any chassis on Resin moulded bodies fitted with Class A motors
Class B constructed cars - any chassis on Resin moulded bodies fitted with Class B motors
Class C constructed cars - any chassis on Plastic moulded bodies


It may be a good idea to ditch the U/O sub-classes as there's six different classes in Event 1 and six different classes in Event 2

No, the only thing that’s changed is
Resin body cars with plastic or metal chassis are allowed in class A as long as they use Class A motors
Resin body cars with plastic or metal chassis are allowed in Class B as long as they use Class B motors
Plastic moulded bodies with metal chassis are not allowed in class A or B, they must be in Class C

There dimensional variations in Events1 & 2 are there to enable entrants to make models with the correct to scale wheels fitted. Therefore small cars like Minis or Imps can be entered with smaller wheels and lower track tolerance ( which goes with it). As of course you cannot fit the larger diameter wheels under these Mini cars.

But if you are entering above 2 litre cars you have to comply with the higher diameter wheels (ie you cannot fit tiny wheels on Saloon cars above 2litres) 
Which perhaps entrants would not be doing anyway………or would they, probably yes based on experience
Quote
#75

Looks we have a fully booked Proxy

Makem (2)
Savage GT (2)
Brumos RSR (2)
BARacer (2)
ClassichrisK (2)
AdeC (2)
Kevan (2)
Mike174 (2)
OXO cube (2)
PaulCooper (2)
Andy W (1)
ALS (1)
mookasaurus (1)
Ruscillo Racing (2)
Ash B (2)
Lifeboats Racing (2)
Harrisons Racing (2)
Team Alaric (?)
Courtney Sport (2)
High Voltage (1 + ?)
Hotlap (1+ ?)
Groundhogs (2)

So any additional entrants will be placed on a reserve list as often we get a couple of people drop out before the Registration date.
[+] 2 members Like Graham's post
Quote
#76

Good morning

I just updated the list of eligible motors for the proxy, with a few more which I have approved.

[attachment=29235]
[+] 4 members Like Graham's post
Quote
#77

I can't believe there's no Citroens listed, Renault yes but no Citroens.

Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#78

Graham, would it be possible to have a list of tracks hosts, pictures and a ballpark length as we move forward with the proxy?
[+] 1 member Likes Brumos RSR's post
Quote
#79

This is 8 years ago but a Saloon/Gr5 race on our track at out old club room.  A lot of these club members haven't been down for years.




Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#80

Kevan, is this a host track?  How long is it, what gearing is recommended what’s an average lap time and is 22k too much motor?
Quote


Possibly Related Threads...
Thread / Author Replies Views Last Post
Last Post by Graham
24th-Feb-26, 09:46 AM
Last Post by Brumos RSR
4th-Oct-25, 01:25 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)