[Graham]

Touring Cars Challenge - Further Consideration Pt2
So I now have in my mind:
Event 1 Under 2.0 Litre Touring Cars (1960-1989)
Class 1.1 -Standard Revoslot Cars
Class 1.2 - Other construction cars than above (with restrictions TBA)

Event 2 Over 2.0 Litre Touring cars (1960-1989)
Class 2.1 - Modified/ Standard Cars (Only Scalex, SCX, Ninco, Pioneer or Fly body based)
Class 2.2 - Other construction cars than above (with restrictions TBA)

Event 3 Modern Touring cars (1990- to date)
Class 3.1 - Modified/ Standard Cars (Only Scalex, SCX, Ninco or Fly body based)
Class 3.2 - Only cars fitted with 3d chassis permitted (as above with 3d chassis or slot it adjustable chassis and slot it motor mount)

The following slot cars would be of Restricted Construction
Revoslot based cars - Only Revoslot parts to be used (except screws, wires and braids)
Slot It based cars- Only Slot it parts to be used (except screws, wires and braids)
B&W or metal chassis cars- (Scalex, SCX, Ninco, Fly or Resin body based)
TA71 lightweight body cars - must use associated TA71 chassis.

Motors - to be listed
Only S-Can, Short Can or SCX (old style Can motors) permitted
Any orientation
Max 21k rpm

Comment
I am open to questions, suggestions which might assist me getting the rules easily understandable and improved ?
The dimensional restrictions need to worked out as yet for axle widths and tyre widths etc.
Only the Slot it Datsun, Mercedes 190E and Nissan Skyline would qualify for inclusion based on this plan.