[Tibbs]

I've been working on the interior.
The kit came with a man which is sort of arms and head but I wanted to use a complete figure.
So I brought a interior kit which has dash and top of a motor and a figure.
I've married up 3 figures in the end to get what I'm after and using a race seat from the after market kit.
I had to cut away a bit of the floor and rig the seat up so it works right with driver height and able to hold the steering wheel.
I've used some random part to make the distance on the steering wheel fit.
   
   
I made a little gauge box that the Scaleauto doesn't have out of styrene, this will get glued in once painted.
   
   
I used two different sections of roll cage and drilled a hole and glued them together.
   
The aftermarket motor is quite good, I didn't like the black things on the sides. I think they are meant to be headers and pipes so I've made my own from a reference pic.
   
   
Here it is before paint with the roll cage in.
   
I decided I wanted the back bumper area looking the same as the race car unlike the scaleauto kit is.
I cut some bits out from it and added some styrene then shaped some curves.
There is a trumpet thing on the right side which I think is something to do with air jack system.
I made that buy using some ali tube putting a nail punch in it and flaring it, then I put it in my small Dremel and polished it.
I think this section looks really cool.
   
   
   
   
I've given all this a black primer and next I'll be base coat black and detail paint the motor, roll cage and driver.
   
Cheers for looking.