Posts: 2,521
Threads: 117
Likes Received: 2,872 in 1,462 posts
Likes Given: 7,602
Joined: Jan 2020
Location Eastbourne UK
Any tips for holding your motor firmly in position when your motor pod has slotted fixing holes?
Let's go...Off Road!
•
Posts: 304
Threads: 17
Likes Received: 368 in 158 posts
Likes Given: 349
Joined: Apr 2019
Cheese head machine screws.....maybe with washers to spread the load on that plastic which will be softish no doubt.
•
Posts: 4,562
Threads: 147
Likes Received: 3,084 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Superglue
Life is like a box of Slot cars...
Posts: 627
Threads: 6
Likes Received: 1,376 in 592 posts
Likes Given: 1,887
Joined: Jun 2019
Location The Netherlands
Perhaps you can fill the slotted holes with pieces of plastic the same thickness as the motor pod.
Then drill holes for the motor. This way the motor can't go up or down.
You may need some washers if the screw heads are to small.
Posts: 4,562
Threads: 147
Likes Received: 3,084 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Simplest way is washers under the heads of the screws to spread the load, they won't move unless you're a smasher/crasher.
Life is like a box of Slot cars...
Posts: 2,521
Threads: 117
Likes Received: 2,872 in 1,462 posts
Likes Given: 7,602
Joined: Jan 2020
Location Eastbourne UK
With all the forces that the motor generates with acceleration and braking, I am thinking that a slot is always going to be a weak link. And I don't like to rely on either friction or glue. So maybe as suggested I'll infill the two slots with some spare plastic and then just drill a simple hole in each.
Let's go...Off Road!
•
Posts: 4,562
Threads: 147
Likes Received: 3,084 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Some cars only have one screw hole and the motor doesn't rotate loose in those if the screw is properly tight.
Life is like a box of Slot cars...
•
Posts: 2,521
Threads: 117
Likes Received: 2,872 in 1,462 posts
Likes Given: 7,602
Joined: Jan 2020
Location Eastbourne UK
True...
Let's go...Off Road!
•
Posts: 4,562
Threads: 147
Likes Received: 3,084 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
...and some motors don't have screw holes (older NSR's) and glue holds them just fine.
Life is like a box of Slot cars...
•
Posts: 304
Threads: 10
Likes Received: 292 in 158 posts
Likes Given: 51
Joined: Sep 2019
Location Cornwall
For fifty odd years all my motors were soldered in
Bernie, racing since 1969