[Johnno]

With each piece of track, turn it over and using a flat bladed screwdriver, press all the small silver retaining tabs down firmly and this will certainly help, ys I had Scalextric SSD and once I did this I had zero issues and NO power taps were needed on a 30 metre track. 

Power taps, power taps, power taps is all I see and hear and power taps are not ALWAYS the answer, these power tap posts need to slow down considerably and stop making considerably more work unnecessarily for people.

[Scuderia_Turini]

Hello Stu,
I have no experience of the solution that Pendle Slot Racing created but it seems a great idea to me.  When I had Ninco track I pushed stripped wire down in between the rail and the track surface using a flat blade screwdriver and the Pendle items do the same trick. They can be inserted without lifting the track sections :-)    
Instructions are here -  https://www.pendleslotracing.co.uk/downl...osters.pdf 

https://www.pendleslotracing.co.uk/psr-t...sters.html

Leo

[StuBeeDoo]

.........  the solution that Pendle Slot Racing created

Hhmmmmm.  Interesting.     I need to get some stuff from Pendles soon, so I'll add one of those to the order.

Thanks, Leo.

[StuBeeDoo]

......... the solution that Pendle Slot Racing created..........

For the sake of continuity of the thread, I now have some of Pendle's strips to fit.  If I remember, I'll post the result here when I get 'round to fitting them - which could be a while as I've got loads of cars I'm currently working on.