[JMay]

Here is the STL file that will make either a 4 or 6 lane gantry. The gantry sections need to be mirrored to create the top and R/H sections. The two versions are colour coded and I removed the logo and LED cut outs so these can be customised to suit.

The 6 lane version either needs a 300mm bed printer or will require further sectioning, the 4 lane will fit on a 250 x 210 bed. 

   

STL file 

4-6 lane gantry.stl Size: 1.61 MB  Downloads: 1

Cheers

John