11th-Jun-19, 04:58 PM
Yo Newt,
I found this info: "On the TOUAREG there is only 2 screws up front that secure the chassis to the body. Once removed, you must pull forward on the chassis to get it to release from the mount in the body. This is a very tight fit and you will have to use a little more force than you are used to.
"
on http://www.homeracingworld.com/rallyraid.htm
So your thought is correct. Using a thin bladed screwrdriver gently as a lever might provide a more controlled force
Leo
I found this info: "On the TOUAREG there is only 2 screws up front that secure the chassis to the body. Once removed, you must pull forward on the chassis to get it to release from the mount in the body. This is a very tight fit and you will have to use a little more force than you are used to.
"
on http://www.homeracingworld.com/rallyraid.htm
So your thought is correct. Using a thin bladed screwrdriver gently as a lever might provide a more controlled force
Leo
Forum Precepts: Don't hijack or divert topics - create a new one. Don't feed the Troll. http://www.scuderiaturini.com
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)