Removing Ninco VW Raid chassis - How to? - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Racing (https://slotracer.online/community/forumdisplay.php?fid=27)
+--- Forum: Tips & Tuning (https://slotracer.online/community/forumdisplay.php?fid=22)
+--- Thread: Removing Ninco VW Raid chassis - How to? (/showthread.php?tid=525)

---

Removing Ninco VW Raid chassis - How to? - Newt - 11th-Jun-19

Hi all,
After some advice. I have a Ninco Raid Volkswagen and I need to remove the chassis as the plexiglass screen has come loose. It has 2 screws to the front of the body but there is not one to the rear as is the case with a similar Bowler I have. The rear appears to be clipped into the body but I do not want to force this out and crack anything. 
Does anyone know how to remove this please?

Newt

---

RE: Removing Ninco VW Raid chassis - How to? - Scuderia_Turini - 11th-Jun-19

Yo Newt, 
I found this info:  "On the TOUAREG there is only 2 screws up front that secure the chassis to the body. Once removed, you must pull forward on the chassis to get it to release from the mount in the body. This is a very tight fit and you will have to use a little more force than you are used to. 

"
on  http://www.homeracingworld.com/rallyraid.htm

So your thought is correct. Using a thin bladed screwrdriver gently as a lever might provide a more controlled force

Leo

---

Newt - Newt - 11th-Jun-19

Many thanks Leo,
Have been trawling the web and other forums but struggled to find anything. Really appreciate you pointing me in the right direction, Thankyou. 
Newt

---

RE: Removing Ninco VW Raid chassis - How to? - Kevan - 7th-Aug-19

I got one yesterday and took me a while to suss out out. Take the front screws out then lift the body about 20mm and you'll see the back end has no hidden screws but is located by a black D shaped tab. You'll have to slide the chassis sideways with a wiggle to start it moving. It's far too tight and asking to split the body so I eased the two plastic pieces a little too make it easier in future

---