Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Local clubs
#1

I'm trying to find local groups or clubs in the North Orange County, California area. Anyone out there know of a way to find a list of either groups, clubs, or even tracks in my area. I've tried searching but I'm just not very good at it I guess. The only one I'm finding is Electric Dreams, which is a good distance from me. I'd appreciate any help on this.
Quote
#2

Hello Joe,
Email Electric Dreams and ask them. They are very active in the North American slot car world and are have contact with many clubs.  
There is a group known as "Norcal Slot Car Racing Association". Their web site is fairly quiet but they list four clubs here -   https://www.norcalscra.com/contact.php 
One of the reps from the Modesto based "Motown Raceway" appears regularly on the World Wide Slot Car Chat.  This is a Zoom chat and is published on Youtube.  You could ask on there.  https://youtu.be/56yD4Fgws04?t=803

Leo (In Scotland so apologies if geography is wild)

Forum Precepts:  Don't hijack or divert topics - create a new one.   Don't feed the Troll.    http://www.scuderiaturini.com
Quote
#3

There's another way to race.

Make a track and host races.

If you build it. They will come.  Thumbup Checkeredflag

It's a bit more work and money at the start. But, look at all the travel time and gas you'll save forevermore.

   
[+] 1 member Likes KensRedZed's post
Quote
#4

(4th-Sep-26, 11:43 PM)Scuderia_Turini Wrote:  Hello Joe,
Email Electric Dreams and ask them. They are very active in the North American slot car world and are have contact with many clubs.  
There is a group known as "Norcal Slot Car Racing Association". Their web site is fairly quiet but they list four clubs here -   https://www.norcalscra.com/contact.php 
One of the reps from the Modesto based "Motown Raceway" appears regularly on the World Wide Slot Car Chat.  This is a Zoom chat and is published on Youtube.  You could ask on there.  https://youtu.be/56yD4Fgws04?t=803

Leo (In Scotland so apologies if geography is wild)
Hi Leo,

I've contacted them but, thus far, no reply. I may give them a phone call later in the week. 

Joe
[+] 1 member Likes JoeR's post
Quote
#5

(6th-Sep-26, 01:37 AM)KensRedZed Wrote:  There's another way to race.

Make a track and host races.

If you build it. They will come.  Thumbup Checkeredflag

It's a bit more work and money at the start. But, look at all the travel time and gas you'll save forevermore.

Hi Ken,

That pretty much looks like what I'm going to do. I'm on my third track build. This one is going to be a routed MDF track. I was just looking for someone who might be have some tips on the build who is local. 

Joe
[+] 2 members Like JoeR's post
Quote
#6

(6th-Sep-26, 06:15 PM)JoeR Wrote:  
(6th-Sep-26, 01:37 AM)KensRedZed Wrote:  There's another way to race.

Make a track and host races.

If you build it. They will come.  Thumbup Checkeredflag

It's a bit more work and money at the start. But, look at all the travel time and gas you'll save forevermore.

Hi Ken,

That pretty much looks like what I'm going to do. I'm on my third track build. This one is going to be a routed MDF track. I was just looking for someone who might be have some tips on the build who is local. 

Joe

Once you build a routed track. You'll have a hard time going back to plastic.

Best of luck with it. More people are making their own routed tracks these days. There should be lots of advice on the forums.
Quote
#7

(6th-Sep-26, 08:18 PM)KensRedZed Wrote:  
(6th-Sep-26, 06:15 PM)JoeR Wrote:  
(6th-Sep-26, 01:37 AM)KensRedZed Wrote:  There's another way to race.

Make a track and host races.

If you build it. They will come.  Thumbup Checkeredflag

It's a bit more work and money at the start. But, look at all the travel time and gas you'll save forevermore.

Hi Ken,

That pretty much looks like what I'm going to do. I'm on my third track build. This one is going to be a routed MDF track. I was just looking for someone who might be have some tips on the build who is local. 

Joe

Once you build a routed track. You'll have a hard time going back to plastic.

Best of luck with it. More people are making their own routed tracks these days. There should be lots of advice on the forums.

I've been searching the forums and watching videos so I think I've got it figured out. I hope, lol. I've been working on a plan for a hoist system so I can raise it up to the ceiling, or at least almost to the ceiling, I have storage racks that hang down from the ceiling. Of course if I could get rid of all the junk that is in the racks I'd have no problem lifting it up to the ceiling.
[+] 1 member Likes JoeR's post
Quote
#8

Hi Joe,

That's a great idea. There are videos on the Tube on how to make a winch system for your track.

Know what one guy had under his track? A totally different track!!!  Wrench

Brilliant!  Bigsmile
Quote


Forum Jump:


Users browsing this thread: 2 Guest(s)