[JMay]

To cater for the GP racers, have developed a front motored chassis as shown below. Chassis is kept to the width of the FC130/S can motor and has a pivoting front axle guide assembly which is constrained and sprung by 2 piano wires as shown. 

Track testing has shown the resin bodied car in the second picture performs well considering the narrow track and top weight. In the kit is 2 body posts, the chassis in 2 sections plus 2 pieces of piano wire for the suspension. This will be offered as a custom wheelbase option i.e. >65mm to @90mm as each chassis can be adjusted in CAD before printing.

   

   

Cheers 
               JMay