16th-May-20, 10:22 AM
The Street Stock cars have been scrutineered, stickered up (white = street stock, letter = entry number), tyres cleaned and a little oil on the gears (if needed). Each car has been run for 10-60 seconds on 9 volts until a consistent motor tone is achieved. That also keeps excess lubrication off the strip.
Scrutineering involved weighing, measuring overall width and tyre height, plus a look inside at the motor and gearing. I also measured the length of each car for Drag Basic's virtual speed trap. Almost every car has a suitable fictitious driver name assigned to use in Drag Basic and the race results.
The first round of qualification runs will start about midday
