[ScorpiusWireless]

Development and testing. 
Carrera CU, Carrera 132 OEM chipped Carrera car, Scorpius controller using an ESP32.
The OEM chip has 15 step control.
But if you listen you’ll hear the transitions are smooth and you can hear a fairly good range. It’s the Scorpius 255 throttle steps being converted proportionally to Carreras 15 steps. 
This is testing the Nitrous dongle firmware using an ESP32 and Scorpius controller into the a Carrera CU. 
We also decided the Nitrous dongle needs to be separately powered as the 5V signal from the Carrera CU 
doesn’t have enough Grunt.

The video shows you can now use a Scorpius controller (using Scorpius protocols) to drive a Native Carrera system. It’s a major step forward. 

Next step is to integrate the Nitrous chipped car which is simply Scorpius car protocols. Add in our new function of the Scorpius controller being able to talk to a Carrera CU and you have all bases covered. 

So one MPD will act as Nitrous car decoder, one MPD will act as Nitrous dongle. Cheers.
https://youtube.com/shorts/x3MbhtqRAY4?s...hwBXDpjKP3