29th-Mar-21, 12:29 PM
hey up......
The flipper is held by a barbed pin,which is reluctant to release its self...
It will come out but getting a grip ontop of the pin usually ends in leaving plier marks on the pin head requiring a bit of a tidy up with a file...
Think your problem with cars guides hitting the tip of the changing blade can be improved...
In the slot ,just before the tip of the blade there should be a little side rail protrusion.
This little bump in the side of the metal rail deflects the front of the blade away from the tip of the changing blade..
Maybe increase the size of this little bump,by putting an appropriate sized screwdriver tip in from underneath between the rail side and plastic side and levering a slightly larger bump..
The flipper is held by a barbed pin,which is reluctant to release its self...
It will come out but getting a grip ontop of the pin usually ends in leaving plier marks on the pin head requiring a bit of a tidy up with a file...
Think your problem with cars guides hitting the tip of the changing blade can be improved...
In the slot ,just before the tip of the blade there should be a little side rail protrusion.
This little bump in the side of the metal rail deflects the front of the blade away from the tip of the changing blade..
Maybe increase the size of this little bump,by putting an appropriate sized screwdriver tip in from underneath between the rail side and plastic side and levering a slightly larger bump..
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)