[Savage GT]

Fresh from body assembly.
I did have a fight with the front grill, its bottom tab was fouling the chassis, so in the end I bent it up inside, then had to re bend the rest to fit properly as it doesn't take much to pull it out of shape !
Once I learned the door rails were a bit of a flex to fit, it all went together easily enough.











The " Ford Arizona Gold" isn't quite as Bronze as I had hoped, the perils of using pics of real cars on the internet !
And I still can't seem to get the finish I like with these Hycote rattle cans, I need Halfords to open up so I can get back to what I know, or perhaps I'll try some Tamiya or Humbrol spary cans next time !

Since I took the pics, I have painted the inside of the wheel arches and any visible posts matt black.

Decals designed by me and sent to be printed by Colin of C&C Designs.

And just to be a a little different, I thought I would do the wheels smoked silver:



The plan is to keep the chassis stock, apart from moding for a Scaleauto guide (I thought the white kits came with the extra Pioneer 7mm guides as per the normal cars, apparently not   ).

I will be swapping out the motors for 13k units I got from China to try, and using the above tyres as they have a little smaller dimensions than the stock items.
Those are WASP urethanes #13 for Pioneer Dodge Chargers. 
I also have the same fitment from Paul Gage, but they are closer in size to the Pioneer tyres, so I am hoping the WASP grip as nicely as PG's do on my track as I prefer the smaller size for these cars.