Posts: 3,252
Threads: 92
Likes Received: 4,839 in 2,106 posts
Likes Given: 573
Joined: Nov 2020
Location Nottingham
What is the best way to remove masking tape adhesive which has transferred onto a painted model surface ?
•
Posts: 4,562
Threads: 147
Likes Received: 3,085 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Try lighter fluid
Life is like a box of Slot cars...
•
Posts: 304
Threads: 17
Likes Received: 368 in 158 posts
Likes Given: 349
Joined: Apr 2019
Sounds like a start again situation to me.
Lighter fluid/ fuelite/ shellite might work if there is a light (?) amount of goo remaining but vigorous rubbing usually sees paint loss.
•
Posts: 605
Threads: 50
Likes Received: 450 in 275 posts
Likes Given: 966
Joined: Apr 2019
Location Australia
IPA (IsoPropyl Alcohol)
Eucalyptus Oil, you will need to use some sort of oil remover such as shellite, IPA but eucalyptus oil is used world over to remove all sorts of stickers.
Be careful with these products as too much polishing, scrubbing may tarnish the surface or even damage the surface.
•
Posts: 4,562
Threads: 147
Likes Received: 3,085 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
Post a photo of the offending problem Graham, it may make problem solving easier.
Life is like a box of Slot cars...
•
Posts: 3,252
Threads: 92
Likes Received: 4,839 in 2,106 posts
Likes Given: 573
Joined: Nov 2020
Location Nottingham
(18th-Sep-23, 08:00 AM)Kevan Wrote: Post a photo of the offending problem Graham, it may make problem solving easier.
The lighter fuel seemed to work, others had mentioned using waxes or T-Cut etc, but I want to use a clear over lacquer and was worried that using a wax or oil would cause me other issues afterwards. The main problem had been where the masking tape edges had left a slight ridge of adhesive, the lighter fuel has removed this but also some of the paint under the line where the edge of the tape had been. So I will need to respray this area again, but it is relatively a small area, so I think I can re do this without having to rework the whole moulding.
Posts: 159
Threads: 8
Likes Received: 388 in 114 posts
Likes Given: 176
Joined: Sep 2020
A citrus oil based glue remover followed by soap and water to remove the oil may be a bit easier on the paint than lighter fluid.
•
Posts: 986
Threads: 113
Likes Received: 1,317 in 495 posts
Likes Given: 1,247
Joined: Apr 2019
Location Cambridgeshire
Going forward, I would recommend Tamiya model masking tape as it leaves a crisp line and no residue from my experience.
Posts: 4,562
Threads: 147
Likes Received: 3,085 in 1,831 posts
Likes Given: 4,254
Joined: Apr 2019
Location Isle of Man
We have a tin of servisol sticky label remover at work, citrus based, it would probably work great.
Life is like a box of Slot cars...
•
Posts: 2,079
Threads: 132
Likes Received: 3,447 in 1,405 posts
Likes Given: 3,171
Joined: Sep 2020
Location A small igloo in Canada
This product is designed to remove adhesive residue. It is also citrus based.
(This post was last modified: 20th-Sep-23, 05:17 AM by
KensRedZed.)