Masking tape - Printable Version

Masking tape - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Slot Cars (https://slotracer.online/community/forumdisplay.php?fid=3)
+--- Forum: Scratch Building (https://slotracer.online/community/forumdisplay.php?fid=35)
+--- Thread: Masking tape (/showthread.php?tid=3898)

Pages: 1 2

Masking tape - Graham - 17th-Sep-23

What is the best way to remove masking tape adhesive which has transferred onto a painted model surface ?

RE: Masking tape - Kevan - 17th-Sep-23

Try lighter fluid

RE: Masking tape - munter - 17th-Sep-23

Sounds like a start again situation to me.
Lighter fluid/ fuelite/ shellite might work if there is a light (?) amount of goo remaining but vigorous rubbing usually sees paint loss.

RE: Masking tape - Johnno - 18th-Sep-23

IPA (IsoPropyl Alcohol)
Eucalyptus Oil, you will need to use some sort of oil remover such as shellite, IPA but eucalyptus oil is used world over to remove all sorts of stickers.

Be careful with these products as too much polishing, scrubbing may tarnish the surface or even damage the surface.

RE: Masking tape - Kevan - 18th-Sep-23

Post a photo of the offending problem Graham, it may make problem solving easier.

RE: Masking tape - Graham - 18th-Sep-23

(18th-Sep-23, 08:00 AM)Kevan Wrote: Post a photo of the offending problem Graham, it may make problem solving easier.

The lighter fuel seemed to work, others had mentioned using waxes or T-Cut etc, but I want to use a clear over lacquer and was worried that using a wax or oil would cause me other issues afterwards. The main problem had been where the masking tape edges had left a slight ridge of adhesive, the lighter fuel has removed this but also some of the paint under the line where the edge of the tape had been. So I will need to respray this area again, but it is relatively a small area, so I think I can re do this without having to rework the whole moulding.

RE: Masking tape - mickey thumbs - 19th-Sep-23

A citrus oil based glue remover followed by soap and water to remove the oil may be a bit easier on the paint than lighter fluid.

RE: Masking tape - Savage GT - 19th-Sep-23

Going forward, I would recommend Tamiya model masking tape as it leaves a crisp line and no residue from my experience.

RE: Masking tape - Kevan - 19th-Sep-23

We have a tin of servisol sticky label remover at work, citrus based, it would probably work great.

RE: Masking tape - KensRedZed - 20th-Sep-23

This product is designed to remove adhesive residue. It is also citrus based.

[attachment=31826]