Display Configuration...

With this button the Display configuration1MO0O99 is being opened. Use the drop-down-list on the right for selection of the display configuration to be used.


Visibility in editor/on printer

Here you can turn the track elements on and off. In some cases the clearness and performance of the track redraw may be enhanced by turning some elements off. The display of track sections, track borders, fences and lanes can be turned on and off independently. However one of these elements must be turned on.

In addition the free and section annotations may be switched on and off.


Border width (%)

For clearness of the display the track isn´t drawn to the edge of the display window or the printed paper. The border to be used can be configured here (in % of the layout size). This configuration is only used for graphical reasons and doesn´t influence the layout in any other way.


Grid

These options can be used to draw grid-lines in the track editor view. The lines may be drawn above or underneath the track sections. In addition the colour, spacing and shift of the lines may be configured.

The grid lines normally start from the start of the track layout and may be shifted using the parameters “Grid offset”.



Created with the Personal Edition of HelpNDoc: Free iPhone documentation generator