18th-Sep-21, 08:29 PM
my current projects:
![[Image: Fiat500-01.jpg]](https://i.postimg.cc/Y9PR3sWY/Fiat500-01.jpg)
![[Image: screwbox01.jpg]](https://i.postimg.cc/Bt9gWPNv/screwbox01.jpg)
![[Image: screwbox02.jpg]](https://i.postimg.cc/d3TBSj2X/screwbox02.jpg)
![[Image: screwbox03.jpg]](https://i.postimg.cc/ZYBzSkVk/screwbox03.jpg)
![[Image: screwbox04.jpg]](https://i.postimg.cc/T2zM2k4K/screwbox04.jpg)
Fiat 500 in the works, resin body needs a little attention.
found slide bearings for 2mm axles on aliexpress - had to try them.
best combination are slot.it axles and the bearings with the flange. all other do not offer good axle play.
jedelloh axles should work with a little sanding, too.
chassis in the pictures offers the possibility to unmount the fully rear axle.
in combination with a tire trueing machine the perfect way to get round tires!
![[Image: Fiat500-01.jpg]](https://i.postimg.cc/Y9PR3sWY/Fiat500-01.jpg)
![[Image: screwbox01.jpg]](https://i.postimg.cc/Bt9gWPNv/screwbox01.jpg)
![[Image: screwbox02.jpg]](https://i.postimg.cc/d3TBSj2X/screwbox02.jpg)
![[Image: screwbox03.jpg]](https://i.postimg.cc/ZYBzSkVk/screwbox03.jpg)
![[Image: screwbox04.jpg]](https://i.postimg.cc/T2zM2k4K/screwbox04.jpg)
Fiat 500 in the works, resin body needs a little attention.
found slide bearings for 2mm axles on aliexpress - had to try them.
best combination are slot.it axles and the bearings with the flange. all other do not offer good axle play.
jedelloh axles should work with a little sanding, too.
chassis in the pictures offers the possibility to unmount the fully rear axle.
in combination with a tire trueing machine the perfect way to get round tires!