[bowley]

Hi guys, can somebody help me out. I need to know what anglewinder motorpod to use with scaleauto sc_0008b motor. Thanx in advance.

[KensRedZed]

What are the details of car and chassis?

[Kevan]

As that's a 130 sized motor it'll fit any of the AW pods but there will be a gap at the end because the motor won't fill the gap for a 180 motor...but it'll work just fine

...what I'm getting at is there isn't a specific AW pod for a short can, they're all for long cans

[bowley]

Thanx for replies,it's for a scaleauto rs200 R build project. I have to order few parts so I can Finnish it. We'll finish this stage; I will be fitting spring suspension to pod & am making mounting posts for shock absorbers at front. Taking longer than expected but won't be long now.

[bowley]

Also I'm using 6649B medium chassis so is rt3 or rt4 motorpod best? It will have spring suspension fitted too so which should I use?

[Kevan]

I can't answer that.  I presume as you're fitting suspension that it's for plastic tracks (which we don't use, our 3 Rally stages are wood)

[chrisguyw]

Also I'm using 6649B medium chassis so is rt3 or rt4 motorpod best? It will have spring suspension fitted too so which should I use?

As you are using the SC-008 (20K motor),......there is actually very little to choose between the RT3 and 4,........the 4 is a touch stiffer, but the 3 is more than stiff enough for the 0008 motor, and, if adding ballast is in the cards, the 3 is easier to add weight to.

The choice is yours, for your motor, you very likely will not notice any performance difference whatsoever.

Out of curiosity, why are you wishing to run an anglewinder pod ???,........Scaleauto makes RT3 sidewinder pods for the FC-130 sized motors, in 2 offsets. These have the same bolt/screw patterns as their anglewinder pods, and will bolt right into your chassis plate. They are part #'s 6526C and 6528C

Cheers
Chris Walker

[bowley]

I' want anglewinder pod with the dual shaft motor because it's a project build; anglewinder shaft drive 4x4. Thanks for reply mate.

[AlexisGaitanis]

is this what you are looking for?
   

[Kevan]

Do they fit the Scaleauto 6649B chassis he's using?