[BAracer]

So here is my starting point...

   

Made up of...

Scaleauto 991 chassis from the R-Series donor car
Slot.it anglewinder motor mount, 0.0mm offset
Slot.it 12/27 gears
Slot.it oXigen Type C chip
Regulation motor Scaleauto 0027b 18,000rpm "Baby Sprinter”
Regulation rear wheels & tyres, Scaleauto SC2018 ProComp-3 20.5 x 9mm 

With the intended Scaleauto 991 body, weight will be around 91g against the class minimum 85g. And I still have to fit the lighting kit, which will add a few more grams.

Some of the choices I made; 
Slot.it motor mount over the Scaleauto mount as it makes for a easier install for the digital chip
A 12/27 gear selection as this mirrors the original R-Series model. I have never raced at North Staffs or Rockingham, so have no experience to know whether this is the best choice, but I am expecting gear ratios to change over time as I get to know how the car behaves.
Slot.it oXigen Type C chip as I can set it to SSD mode so I can run the car on my home Scalextric track and try different tuning options.

There is a body with my name on on the other side of the world which, when restrictions become relaxed, will be winging it's way onto this chassis.

I would welcome any comments on preferred set ups from those of you who have raced in this series previously and have experience of the events.