2nd-Nov-19, 12:09 PM
Next up are a couple of SP15 repairs ......
![[Image: gallery_11296_1743_19494.jpg]](https://www.slotforum.com/forums/uploads/1415729101/gallery_11296_1743_19494.jpg)
The dual MOSFET chip has melted and released it's quota of smoke and vapours ....
Sometimes, the evidence for the chips failure is not always quite so easy ...
![[Image: gallery_11296_1743_24127.jpg]](https://www.slotforum.com/forums/uploads/1415729101/gallery_11296_1743_24127.jpg)
The larger arrow shows a degree of discolouration on the solder pad of a diode. A further clue to the problem is highlighted
by the smaller arrow, is an adjacent solder has turned orange from a normal silver. These features are caused by
excessive heat ....... note: the wires for the braid pickups have been removed for clarity.
![[Image: gallery_11296_1743_19494.jpg]](https://www.slotforum.com/forums/uploads/1415729101/gallery_11296_1743_19494.jpg)
The dual MOSFET chip has melted and released it's quota of smoke and vapours ....
Sometimes, the evidence for the chips failure is not always quite so easy ...
![[Image: gallery_11296_1743_24127.jpg]](https://www.slotforum.com/forums/uploads/1415729101/gallery_11296_1743_24127.jpg)
The larger arrow shows a degree of discolouration on the solder pad of a diode. A further clue to the problem is highlighted
by the smaller arrow, is an adjacent solder has turned orange from a normal silver. These features are caused by
excessive heat ....... note: the wires for the braid pickups have been removed for clarity.

![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)