31st-Oct-19, 09:54 PM
AUTOart Jaguar - C-Type, continued .......
As things were getting a little busy, I had to call on the Dangerous Brothers to help do the final fix for the lights for the car in post #5 ...
![[Image: post-11296-0-52770900-1568397237.jpg]](https://www.slotforum.com/forums/uploads/monthly_09_2019/post-11296-0-52770900-1568397237.jpg)
The left sided light is fixed in place first and the adhesive is allowed to dry thoroughly
before any more work can start ....
![[Image: post-11296-0-47505900-1568397241.jpg]](https://www.slotforum.com/forums/uploads/monthly_09_2019/post-11296-0-47505900-1568397241.jpg)
The right sided light can now be fixed into place ...
![[Image: post-11296-0-79911900-1568397245.jpg]](https://www.slotforum.com/forums/uploads/monthly_09_2019/post-11296-0-79911900-1568397245.jpg)
The connection between them is now made ...
![[Image: post-11296-0-08617100-1568397251.jpg]](https://www.slotforum.com/forums/uploads/monthly_09_2019/post-11296-0-08617100-1568397251.jpg)
The dropping resistors are now created as one unit ...
![[Image: post-11296-0-58584300-1568397257.jpg]](https://www.slotforum.com/forums/uploads/monthly_09_2019/post-11296-0-58584300-1568397257.jpg)
The main elements of the circuit are now in place. It just remains to connect them
into the wiring loom ...
The rear lights were completed in the same manner .....
As things were getting a little busy, I had to call on the Dangerous Brothers to help do the final fix for the lights for the car in post #5 ...
The left sided light is fixed in place first and the adhesive is allowed to dry thoroughly
before any more work can start ....
The right sided light can now be fixed into place ...
The connection between them is now made ...
The dropping resistors are now created as one unit ...
The main elements of the circuit are now in place. It just remains to connect them
into the wiring loom ...
The rear lights were completed in the same manner .....
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)