4th-Feb-24, 01:51 PM
Well free time has been at a shortage latley, but having just finished and shipped my proxy cars, I could get a little more done on my 3 Monaco's (Blues-mobile, to be Rosco Cop car, and Chicago Police car).
I honestly can not understand why scalextric chose to mount the motor upright, As I already noticed, there is room for it to sit in the "proper" orientation with the stock interior, and perhaps with it that way, they wouldn't have had to jack up the rear of the car so much !
My wheel and tyre comb comes in approx. 0.5mm under the stock diameter, and with the car sitting flat I have dropped the front around 1mm, and the rear around 3mm.
![[Image: tBr3d49.jpg]](https://i.imgur.com/tBr3d49.jpg)
![[Image: auicMUm.jpg]](https://i.imgur.com/auicMUm.jpg)
![[Image: bsoHX6m.jpg]](https://i.imgur.com/bsoHX6m.jpg)
Rosco and Flash are now also done:
![[Image: iBlacpS.jpg]](https://i.imgur.com/iBlacpS.jpg)
I honestly can not understand why scalextric chose to mount the motor upright, As I already noticed, there is room for it to sit in the "proper" orientation with the stock interior, and perhaps with it that way, they wouldn't have had to jack up the rear of the car so much !
My wheel and tyre comb comes in approx. 0.5mm under the stock diameter, and with the car sitting flat I have dropped the front around 1mm, and the rear around 3mm.
Rosco and Flash are now also done:
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)