[Pineman]

KensRedZed pid='36288' dateline='1703742455']

Hi Andy,

Okay, thanks for the info.

okay, will this set up do the trick ?

of course will use thicker gauge wires and add in something for the missing rails.

Hello Pineman,

If you examine Andy's pics. It shows a dead short between the rails. But only on the non-powered track section.

Your jumpers are going to the powered section of track and reversing the polarity. I would not suggest that.

Instead. Replace the yellow/white on one side to both white on one lane. And both yellow jumpers on the other lane. Within the circles/ovals.

Creating a dead short on an unpowered section of track creates drag to a motor in motion. The faster the motor is spinning, the harder the braking. Braking reduces as the car slows down.

Hi Ken,

Okay, see attached, assume this is it, just bridging the non power rails ?