[AlexisGaitanis]

Yes Anthony,resin.A sanding 280 or 400 grit ,depending on the smoothness of the print until lines vanish paying attention not to eliminate panel lines before 1st primer coat.If needed sand again 400grit and  primer coat.Repeat as many times as needed usually not.After the first paint coat sanding with 1000 grit.If i can stand the wait i repeat with 1500 and 2000 grit.For red cars i use Motips Deco range #01640 carmin red RAL 3002 which i find enough glossy and i stop at the 1000 grit sanding