[JMay]

This mod is a coin toss, weighing up the recovery in the event of power failure or print quality. My view is that 9 times out of 10 on thin walled objects i.e. bodies then the print is ruined by having the head ooze filament over the wall and then freeze in position when the power goes out.

Conversely printing large objects with low detail and thick walls (i.e. I made large brackets using a 1mm nozzle for an external light) is recoverable so turning recovery back on is desirable. You can have multiple printers in Cura so one can be with recovery the other with it switched off and these then be selected from the printer box at the top left of the screen.

More recent printers do have this as a menu option so can be selected on the fly, the Creality CR10S and Mini's that I have do not. 

Cheers
John