9th-May-23, 10:12 AM
PVA on my new bed ?? 
Nope.
It printed the letters on at the start (learnt from various sources that the first layers are crucial, so I watch the first 5 mins minimum, then check in every 15 mins as its all new to me).
They seem to have got lost later, I thought maybe the bed temp was to hot and melted it, as well as made it hard to remove, but lowered it from 60 to 57 on the next print, that didn't stick so aborted and put back to 60, the second reprint outline came off better though it also lost some 0.7mm holes.
I made a mistake on my second print, but as its a prototype and I need to do some fine adjusting, that wasn't an issue for me.
Print of my WIP loco chassis:
With the very nice resin print body I bought:
Nope.It printed the letters on at the start (learnt from various sources that the first layers are crucial, so I watch the first 5 mins minimum, then check in every 15 mins as its all new to me).
They seem to have got lost later, I thought maybe the bed temp was to hot and melted it, as well as made it hard to remove, but lowered it from 60 to 57 on the next print, that didn't stick so aborted and put back to 60, the second reprint outline came off better though it also lost some 0.7mm holes.
I made a mistake on my second print, but as its a prototype and I need to do some fine adjusting, that wasn't an issue for me.
Print of my WIP loco chassis:
With the very nice resin print body I bought:
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)