17th-Oct-21, 03:30 PM
The answer to the OP is no. oXigen chips do not have an analog mode. You would need to either:
1 - remove or bypass the chip as explained
2 - short the controller hookup to provide full power to the lane, and drive it as oXigen. Light-based lap counters should work fine, though you might have problems with a dead strip counter.
1 - remove or bypass the chip as explained
2 - short the controller hookup to provide full power to the lane, and drive it as oXigen. Light-based lap counters should work fine, though you might have problems with a dead strip counter.
printables.com/@MrFlippant
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)