[woodcote]

A week on and Scaleauto have released this update…

We updated the information on the range of the formula cars 1:32 where we spotted up some additional information and updated some pictures and details from the projects. If you are still in time you can forward this updated information to your customers.

1/32 Formula90-97 - It's Official

We are proud to introduce a new line to our catalogue: 1/32 Formula 90-97. A complete 90's world championship Grand Prix models to race with 2 different body shapes: low nose and high nose using a common chassis. Each car replicates GP models that used 3.5l and 3.0l motors after the banning of the turbo motor used from 1986 to 1989. These replicas are our tribute for slot car to this memorable 1:1 racing moments. To be launched starting in July 2021 with the white kit cars.

After we did a press releases last week about this new range of products it's show up a batch of questions and make us improve some information to clarify some important features from our range.

Specifications was created from zero, testing on track with first prototype already 2020 summer time, but actual pandemic make us stop and resume continuously till now, where seems that a couple of month of freedom give us the time to finish it. 

Please find some updated information in the portfolio of this new Formula 90-97 to indicate what we are focusing as NEW innovative ideas to any prior 1/32 GP racing developments achieved before, details that make us different:

- Complete NEW range of body shape from 90's with LOW nose and HIGH nose version.

- SC-1608 extended guide.

- DIGITAL compatible.

- Separate motor mount with 2 front and 2 rear screws fixing post. Allowing to use 2, 4 or 6 Suspensions points. 

- Self innovative and own designed formula 90-97 chassis with front and rear  body height adjustment and body floating system over 4 points.

- Chassis wire clips undercut to avoid any interference with the front axle.

- 0.5mm Offset in-line motor mount.

- Use of half thread screws for body play adjustment.

- Suspension system fully adjustable from the underside of the chassis without body disassembling.

- Self centered bushings in the rear axle.

- Rear magnet position.

- Rear sponge wheels as standard in the RS version for wooden track

- 26 tooth inline with lightened plastic. Use of Al-7075 Ergal hard coated stopper. 

- Nylon smooth pinion 10th.

- Chassis: front chassis side diffusers to replicate some of the models. 

- Highly detailed driver and helmet reproduction.

- Complete engineered, developed and final part assembly in Barcelona - Spain. 

Beside that we complete the model with top level details already common in the industry as per below:

- Reinforced guide post. 

- Front axle height adjustment using with x M2.5 screws. 

- Longitudinal braces to improve stiffness and designed for minimal lateral torsion.

- Rear end chassis diffusers design.

- Extra 0,65mm thin body and complete design of all pieces specially designed to get a lower Center of Gravity to improve faster cornering and acceleration.

- AS25 high grip rear tyres for plastic track. One of the best rubber compounds to use on plastic track in the market.

- Motor fixing with 2 screws for ensure straightness and avoid self turning.

- Lightened Aluminum front and rear rims with M2.5 set screw. 

- Hard chrome steel 2.38mm axles.

- Our SC-0025b RS standard magnetic motor Sprinter-2, 21.500rpm and high torque, with air cooling system.

Be original, embrace the difference to race, enjoy and get emotion again with this new 1/32 Scaleauto Formula 90-97 cars.

Gear UP & Win!

Your Scaleauto Team