[BAracer]

Thought I would start off a dedicated thread where we can put down some ideas and see what develops. 

Here is my car for starters (one of the many ex-Woodcote bodies...)

   

Reading the comments in the TR7 thread, there seems to be two possible ways to go: -

1. The Metro route; with a similar track width to the TR7 to allow mixed grids between the two models, or

2. The 6R4 route; basically Metros with skirts, so a wider track and wilder performance.

And will this be a bit of fun for the Christmas break, or something for next August?

[BAracer]

The South Manchester Slot Racing Club Classic Mini Rule Set (courtesy of Angelo Amato)
A 'Metro 6R4' Rule Set

And a slightly modified Nonfractal TR7 Rule Set...
Scalextric Metro body. No chopping the roof off (making it into a cabrio)
48mm or 54mm max track (tba)
Any chassis and side skirts from any material.
Any weight can be added internally to the car.
Any interior (but there must be an interior with a discernible driver with full head/helmet.
Four wheels are mandatory, all four with face detail or inserts.
No magnetraction magnets
No rare earth motors 
Car must have transparent windows 
Suspension is permitted 
Guide must not protrude beyond the front of the car when viewed from above.

[Qman]

I've already got a Scaley bodied 6R4 which I think would comply with those rules, and I have a box of 6R4 shells spare if anyone wants to build one

[Angelo Amato]

my Club spec Metro