Making a windscreen - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: General Discussion (https://slotracer.online/community/forumdisplay.php?fid=1)
+--- Forum: General Interest (https://slotracer.online/community/forumdisplay.php?fid=32)
+--- Thread: Making a windscreen (/showthread.php?tid=1771)

---

Making a windscreen - 964rh - 9th-Dec-20

Hi

Does anyone have any experience of making windscreens for vehicles?

I have a Scalextric truck that I've cut an aperture in for a windscreen and bought some 1mm perspex but I'd like, if possible, to fit into the hole so it's a little recessed around the edges and look 'fitted?'

Is it a case of being really careful with a hot air gun around the edges of the perspex and push fitting until I get the desired result or is there a process out there that I could to follow?

If I can get this right, I might be banging sunroofs in everything!! 

---

RE: Making a windscreen - JasonB - 9th-Dec-20

I've done something similar(ish) before.

I simply marked and cut a piece of clear plastic to the shape of the aperture, and edge glued it in. It's a bit fiddly, and it's definitely not as securely fixed as a moulded lexan sheet with a big overhang to glue, but it can look more fitted if done competently.

---

RE: Making a windscreen - KensRedZed - 10th-Dec-20

A friend of mine makes canopies for his model aircraft. He takes a small piece of pine and sands it to the curve of the window. Then cuts up a Pepsi or Coke bottle because he umm... doesn't like to spend money. Then gently melts the plastic over the curved wood with a hot air gun on low. The wood mold is a bit bigger than the actual window so he can trim a clean edge exactly to the window.

It should not take much time to make a window mold. You can make a few windshields and use the best one.

---

RE: Making a windscreen - dvd3500 - 11th-Dec-20

Check out videos on vacuum forming...

---

RE: Making a windscreen - AlexisGaitanis - 12th-Dec-20

This machine is worth every cent
https://www.ebay.co.uk/itm/Dental-Molding-Former-Thermoforming-Vacuum-Forming-Material-Machine-JT-18-220V/152149625702?epid=1376140060&hash=item236cd30b66:g:kbYAAOSwhOVXdNWp

---

RE: Making a windscreen - Gordon Steadman - 12th-Dec-20

(12th-Dec-20, 08:34 AM)AlexisGaitanis Wrote:  This machine is worth every cent
https://www.ebay.co.uk/itm/Dental-Molding-Former-Thermoforming-Vacuum-Forming-Material-Machine-JT-18-220V/152149625702?epid=1376140060&hash=item236cd30b66:g:kbYAAOSwhOVXdNWp

Or..    Direct from the source

---