Touring Cars Slotting Proxy - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Racing (https://slotracer.online/community/forumdisplay.php?fid=27)
+--- Forum: Proxy Racing (https://slotracer.online/community/forumdisplay.php?fid=42)
+--- Thread: Touring Cars Slotting Proxy (/showthread.php?tid=3540)

---

RE: Touring Cars Slotting Proxy - Kevan - 8th-Mar-23

- removed post as class specs changed during the making of the post -

---

RE: Touring Cars Slotting Proxy - Kevan - 8th-Mar-23

- also removed -

---

RE: Touring Cars Slotting Proxy - Kevan - 8th-Mar-23

Graham, Do I read that as:

Class A constructed cars - any chassis on Resin moulded bodies fitted with Class A motors
Class B constructed cars - any chassis on Resin moulded bodies fitted with Class B motors
Class C constructed cars - any chassis on Plastic moulded bodies


It may be a good idea to ditch the U/O sub-classes as there's six different classes in Event 1 and six different classes in Event 2

---

RE: Touring Cars Slotting Proxy - Graham - 8th-Mar-23

(8th-Mar-23, 08:54 PM)Kevan Wrote:  Graham, Do I read that as:

Class A constructed cars - any chassis on Resin moulded bodies fitted with Class A motors
Class B constructed cars - any chassis on Resin moulded bodies fitted with Class B motors
Class C constructed cars - any chassis on Plastic moulded bodies


It may be a good idea to ditch the U/O sub-classes as there's six different classes in Event 1 and six different classes in Event 2

No, the only thing that’s changed is
Resin body cars with plastic or metal chassis are allowed in class A as long as they use Class A motors
Resin body cars with plastic or metal chassis are allowed in Class B as long as they use Class B motors
Plastic moulded bodies with metal chassis are not allowed in class A or B, they must be in Class C

There dimensional variations in Events1 & 2 are there to enable entrants to make models with the correct to scale wheels fitted. Therefore small cars like Minis or Imps can be entered with smaller wheels and lower track tolerance ( which goes with it). As of course you cannot fit the larger diameter wheels under these Mini cars.

But if you are entering above 2 litre cars you have to comply with the higher diameter wheels (ie you cannot fit tiny wheels on Saloon cars above 2litres) 
Which perhaps entrants would not be doing anyway………or would they, probably yes based on experience

---

RE: Touring Cars Slotting Proxy - Graham - 9th-Mar-23

Looks we have a fully booked Proxy

Makem (2)
Savage GT (2)
Brumos RSR (2)
BARacer (2)
ClassichrisK (2)
AdeC (2)
Kevan (2)
Mike174 (2)
OXO cube (2)
PaulCooper (2)
Andy W (1)
ALS (1)
mookasaurus (1)
Ruscillo Racing (2)
Ash B (2)
Lifeboats Racing (2)
Harrisons Racing (2)
Team Alaric (?)
Courtney Sport (2)
High Voltage (1 + ?)
Hotlap (1+ ?)
Groundhogs (2)

So any additional entrants will be placed on a reserve list as often we get a couple of people drop out before the Registration date.

---

RE: Touring Cars Slotting Proxy - Graham - 14th-Mar-23

Good morning

I just updated the list of eligible motors for the proxy, with a few more which I have approved.

[attachment=29235]

---

RE: Touring Cars Slotting Proxy - Kevan - 14th-Mar-23

I can't believe there's no Citroens listed, Renault yes but no Citroens.

---

Brumos RSR - Brumos RSR - 17th-Mar-23

Graham, would it be possible to have a list of tracks hosts, pictures and a ballpark length as we move forward with the proxy?

---

RE: Touring Cars Slotting Proxy - Kevan - 17th-Mar-23

This is 8 years ago but a Saloon/Gr5 race on our track at out old club room.  A lot of these club members haven't been down for years.

---

RE: Touring Cars Slotting Proxy - Brumos RSR - 17th-Mar-23

Kevan, is this a host track?  How long is it, what gearing is recommended what’s an average lap time and is 22k too much motor?

---