What cars have you built and latest bodies from 3DP - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: 3D Printing (https://slotracer.online/community/forumdisplay.php?fid=56)
+--- Forum: 3DP (https://slotracer.online/community/forumdisplay.php?fid=57)
+--- Thread: What cars have you built and latest bodies from 3DP (/showthread.php?tid=2521)

---

RE: What cars have you built and latest bodies from 3DP - Kevan - 6th-Aug-22

(6th-Aug-22, 10:31 AM)OXO cube Wrote:  bit off topic , but :-
just wondering if anyone has or knows where i could find/buy  an STL file or 3D print for a chassis/ lower body for a Scalextric Ferrari C62/C90 
Or if anyone has an original  lower body /chassis for sale 

Kev

There's a couple on ebay now - yellow one and there's another yellow one

---

RE: What cars have you built and latest bodies from 3DP - JMay - 7th-Aug-22

Like dabbling with the later era CAN AM cars as these are easier to draw than the earlier cars with the flowing curves in 3 planes. Below is a dabbling exercise from a while ago to look at drawing a Lola T333CS, this particular version stopped at this point as I redrew the design from scratch. 

[attachment=25387]

Fast forward to this year and racing NSR F1s on a Ninco club track and the thought crossed my mind of doing a F5000 version body to sit on the NSR F1 chassis below.
Created some lower profile TPU front tyres to go on the NSR hubs but otherwise a stock NSR chassis.

[attachment=25388]

Resurrecting the design in pic 1 and a bit of dabbling produced a stretched version to fit on the NSR F1 chassis as below. This is FDM printed on a CR10s and shown here after rubbing down and primer applied. Shell prints vertically in one go complete with driver. 

[attachment=25389]

 Feel compelled now to design a 3dp chassis for this shell to compete against the NSR.


Cheers
            JMay

---

RE: What cars have you built and latest bodies from 3DP - chappyman66 - 9th-Aug-22

Yup, the vertical prints are pretty good.   That one looks nice.

---

RE: What cars have you built and latest bodies from 3DP - OXO cube - 11th-Aug-22

There's a couple on ebay now - yellow one and there's another yellow one

now youve gone and done it Kevan 

i now still need a chassis for a C62/90 
and now an upper body shell for C3033
they obviously dont match lol

---

RE: What cars have you built and latest bodies from 3DP - chappyman66 - 9th-Sep-22

Lola T222, my entry for a 3DP proxy.
Printed everything except running gear, an homage to Bob Nagel's car.
[attachment=26037]
[attachment=26038]
[attachment=26039]
[attachment=26040]

---

RE: What cars have you built and latest bodies from 3DP - munter - 9th-Sep-22

Looks good Chappyman but.....is the driver hiding from something?

---

RE: What cars have you built and latest bodies from 3DP - Kevan - 9th-Sep-22

(9th-Sep-22, 08:20 PM)munter Wrote:  Looks good Chappyman but.....is the driver hiding from something?

Low bridge...

---

RE: What cars have you built and latest bodies from 3DP - chappyman66 - 18th-Sep-22

That angle does make him look a bit low, yup

---

RE: What cars have you built and latest bodies from 3DP - GT40Racer - 8th-Oct-22

ERA Type B and Bugatti 251 in 1/24
and ERA in 1/32

---

RE: What cars have you built and latest bodies from 3DP - Phil Kalbfell - 8th-Oct-22

Great results, you are doing well.
Phil

---