A video of my wooden rally track ΅Flat Over Crest".

A video of my wooden rally track ΅Flat Over Crest". - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Tracks & Scenery (https://slotracer.online/community/forumdisplay.php?fid=8)
+--- Forum: Show us your track (https://slotracer.online/community/forumdisplay.php?fid=9)
+--- Thread: A video of my wooden rally track ΅Flat Over Crest". (/showthread.php?tid=126)

Pages: 1 2 3 4 5 6

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 20th-Sep-21

Here are a few photos of how you can make fences and gates on your own scenic track:

Hub Thumbup

[attachment=18056][attachment=18057]
The posts around the meadow are made of twigs from a grape bush.       The fences are made of fireworks rocket rods and wooden stirrers.

[attachment=18058][attachment=18059]
A very long straight fence...                                          ... and a curved one.

[attachment=18060][attachment=18061]
The finished very long straight fence... ...and the finished curved fence.

[attachment=18062][attachment=18063]
The finished gate...    ...and seen from a different angle.

RE: A video of my wooden rally track ΅Flat Over Crest". - dreinecke - 23rd-Sep-21

Such fantastic pictures of your work. Thank you for sharing them!

I use lots of bass and balsa wood in my builds and find it super easy to use - glad to see your methods.

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 6th-Jun-22

In this weeks digest, Andy mentioned Rallyhub's Pub.
I hope you will find it interesting to see how it is made:

Hub Thumbup

[attachment=24009][attachment=24010]
Cutting the 5mm foam board. A photo of a pub, found on the internet, served as an example.
[attachment=24011][attachment=24012]
Rear of the pub with its base plate of 3mm plywood. The balsa wooden window frames are almost ready

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 7th-Jun-22

Continuing with some more pictures:

[attachment=24042][attachment=24043]
Pub with drawing. Using a pricker for scratching the stone texture into the walls.
[attachment=24044][attachment=24045]
The stone texture finished. The painting of the walls is done.

RE: A video of my wooden rally track ΅Flat Over Crest". - Kevan - 7th-Jun-22

Excellent!

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 8th-Jun-22

More detailing follows:

[attachment=24081][attachment=24082]
The inside of the building is painted black. Cutting the curtains made from old towels.
[attachment=24083][attachment=24084]
Cutting sandpaper strips... ...and gluing them on a sheet of cardboard.
[attachment=24085][attachment=24086]
Still a lot of sandpaper roof slates to do. The pub is almost weatherproof now.

RE: A video of my wooden rally track ΅Flat Over Crest". - Anthony B - 8th-Jun-22

Hub - SImoly outstanding-thanks so much for taking the time to share!! Thumbup

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 9th-Jun-22

Now we're going up on the roof:

[attachment=24102][attachment=24103]
The roof lead is made from a grey painted strip of paper. Pushing the roof lead into the edge.
[attachment=24104][attachment=24105]
Weathering of the roof slates with several colours. Some slates are lifted somewhat with a screwdriver to get an aged effect.

RE: A video of my wooden rally track ΅Flat Over Crest". - rallyhub - 10th-Jun-22

Finally, some pictures of the rain gutters and the lighting:

[attachment=24132][attachment=24133]
Gutters made from 1/2 brass tubes with braces from paper. The lamp caps are made from M6 hexagon domed cap nuts, acc.DIN 1587.
[attachment=24134][attachment=24135]
The gutters and drain pipes glued to the pub walls. The result.

I hope you liked the photo report about the building process of the pub.

Hub Thumbup

RE: A video of my wooden rally track ΅Flat Over Crest". - Carver - 11th-Jun-22

As always, your work is a great inspiration! Thumbup

Carver