Slotting Car Proxy Club - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Racing (https://slotracer.online/community/forumdisplay.php?fid=27)
+--- Forum: Proxy Racing (https://slotracer.online/community/forumdisplay.php?fid=42)
+--- Thread: Slotting Car Proxy Club (/showthread.php?tid=3177)

---

RE: Slotting Car Proxy Club - Graham - 15th-Mar-24

And I will add that if you happen to be the one and only Sedan in the Event 1 Proxy then you will still win the prize.......but you won't because myself and another are entering Sedans as well.

But Kevan asked about my own cars.......

[attachment=34282]  [attachment=34283]

[attachment=34284]  [attachment=34285]  

[attachment=34286]

Sadly I currently I don't have a Sedan, but I do have the kits from Carlos in Spain and been waiting for an excuse to make one come alive for a very long time. So now I have a year to get my finger out and make a couple at least.

---

RE: Slotting Car Proxy Club - Kevan - 15th-Mar-24

I love the Corvette.  I have resin printed a hard top for my Ninco C1 intended for the Goodwood Kinrara event.

---

RE: Slotting Car Proxy Club - Graham - 26th-Mar-24

Although early for next years proxy I made a start on the Studebaker kit I have last week, and after many hours of sanding it is now weighting around 26gms

Should look something like the real thing when finished

[attachment=34479]   [attachment=34480]

But as I have plenty of time I am also contemplating a Buick or a Jaguar MK7 as alternatives for the Road Race, depending on what eventually seems to run the best.

---

RE: Slotting Car Proxy Club - Kevan - 26th-Mar-24

After many hours file tweaking I have a Stude body awaiting an updated chassis for the Stude I printed a couple of years ago...not one of your flyweight A71 bodies, this one will be over 20g with windows and interior.

[attachment=34481]

---

RE: Slotting Car Proxy Club - Kevan - 26th-Mar-24

A resin Mk7 Jag was seen circumnavigating our track last Thursday...but on a brass/wire chassis

---

RE: Slotting Car Proxy Club - Graham - 27th-Mar-24

First primer spray, looks like there is some filling of the moulding to do 

[attachment=34494]

---

RE: Slotting Car Proxy Club - Kevan - 27th-Mar-24

For some reason the Studebaker Champion/Commander fascinates me, it's a fabulous race car...

[attachment=34496]
[attachment=34497]
[attachment=34498]
[attachment=34499]
[attachment=34500]
[attachment=34501]
[attachment=34502]
[attachment=34503]

---

RE: Slotting Car Proxy Club - Graham - 27th-Mar-24

Yes, I would be very happy with a grid line up of those cars 

Mind you 2nd from last one would not meet my 1.5mm track clearance rule 

---

RE: Slotting Car Proxy Club - Kevan - 27th-Mar-24

(27th-Mar-24, 09:11 AM)Graham Wrote:  Yes, I would be very happy with a grid line up of those cars 

Mind you 2nd from last one would not meet my 1.5mm track clearance rule 

It is cornering hard though

---

RE: Slotting Car Proxy Club - OXO cube - 27th-Mar-24

finding any these iconic cars in 1/32 is the real mission 
especially the Stude 
weird there are lots of 1/43 , 1/24 , 1/25 
or am i looking in the wrong places or using the wrong search criteria 
Kev

---