2023 Touring Car Slotting Proxy Builds - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Racing (https://slotracer.online/community/forumdisplay.php?fid=27)
+--- Forum: Proxy Racing (https://slotracer.online/community/forumdisplay.php?fid=42)
+--- Thread: 2023 Touring Car Slotting Proxy Builds (/showthread.php?tid=3576)

---

RE: 2023 Touring Car Slotting Proxy Builds - Kevan - 9th-Mar-23

YES! 

---

RE: 2023 Touring Car Slotting Proxy Builds - Graham - 9th-Mar-23

(9th-Mar-23, 11:03 PM)BARacer Wrote:  My lawyers are suggesting I can dust off this beauty and run it in Event 2...

Well we had Stirling Moss in the past and currently have Jim Clarke, so why not Jackie Stewart ……..and the car looks quite nice also 

---

RE: 2023 Touring Car Slotting Proxy Builds - Makem - 11th-Mar-23

First one ready for track testing, just waiting for my 3D printer man to do some inserts for me.


Frank Gardners Camaro.

Scalextric Shell, Amato Chassis, Slot it offset pod, Boxer/2 21.5 k motor, Slot it 9/29t offset gears, NSR wheels and tyres, Slot it guide.

Started work on the Sunbeam Rapier, running gear about sorted.

Like to be early 

Gerry

---

RE: 2023 Touring Car Slotting Proxy Builds - Kevan - 11th-Mar-23

Love the Camaro 

---

RE: 2023 Touring Car Slotting Proxy Builds - Mike174 - 11th-Mar-23

I've got a standard ninco Sierra rs500 that I was thinking of running. It has a nc-9 sparker motor fitted. It's rated at 20,800 rpm @ 14.8v. Will this be Class A or B? Cheers

---

RE: 2023 Touring Car Slotting Proxy Builds - Graham - 11th-Mar-23

(11th-Mar-23, 10:46 AM)Mike174 Wrote:  I've got a standard ninco Sierra rs500 that I was thinking of running. It has a nc-9 sparker motor fitted. It's rated at 20,800 rpm @ 14.8v. Will this be Class A or B? Cheers

Hi Mike,
the NC-9 motor is 16K at 12volts and has similar Torque rating to a Scalextric motor, so it can be run as a Class A.

---

RE: 2023 Touring Car Slotting Proxy Builds - Kevan - 11th-Mar-23

I went down to the club this afternoon as it was closed on Thurs due to the snow.

The Audi RS5 DTM goes quite nicely.
I got a pack of Thunderslot tyres to try, I've never used TS tyres before but they perform somewhere between NSR Supergrips and Ultragrips and don't seem to ball up.

I even tried it on the twisty Rally stage...how on earth that big thing got round the hairpins...but it flew round...I like these tyres (Thunderslot Classic Rear Tyres 10.8x19mm Ref : TYC002R) and think they'd be superb for future Rally builds.

Just need inserts for the wheels and it's ready.

I'm planning on something 'different' for Event 1

---

RE: 2023 Touring Car Slotting Proxy Builds - Savage GT - 11th-Mar-23

(11th-Mar-23, 05:12 PM)Kevan Wrote:  I like these tyres (Thunderslot Classic Rear Tyres 10.8x19mm Ref : TYC002R) and think they'd be superb for future Rally builds.

Just need inserts for the wheels and it's ready.

I'm planning on something 'different' for Event 1

Best slice/sand some off then, as 10mm is maximum, and be careful truing, so as not to go under 19mm ;)

---

RE: 2023 Touring Car Slotting Proxy Builds - Kevan - 11th-Mar-23

They're stretched over 15mm wheels and now 9.8mm wide and 20.4 diameter

---

Brumos RSR - Brumos RSR - 27th-May-23

[attachment=30424]

Working on this one with the hopes it shows promise.

---