MRslotcar fc130 sidewinder pod MR2114

MRslotcar fc130 sidewinder pod MR2114 - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Buy & Sell (https://slotracer.online/community/forumdisplay.php?fid=15)
+--- Forum: Wanted (https://slotracer.online/community/forumdisplay.php?fid=17)
+--- Thread: MRslotcar fc130 sidewinder pod MR2114 (/showthread.php?tid=2606)

Pages: 1 2

RE: MRslotcar fc130 sidewinder pod MR2114 - Kevan - 30th-Nov-21

(30th-Nov-21, 10:59 PM)chrisguyw Wrote: If you are running on longer/faster tracks a 25K FC-130 may well be the better option.

Cheers
Chris Walker

But IL or AW only for MRSlotcar chassis.

RE: MRslotcar fc130 sidewinder pod MR2114 - tatter06 - 1st-Dec-21

Hi Chris, that's a very smart build!

I haven't been to that many tracks but I would say it is more of the long sweepy variety, I actually don't know the total length but I think the straight is about 3m into a long sweeper you should be able to take flat out. After that it gets a bit twisty.

I will give the policar motor a go with the hearing you suggest, nothing to lose at this point.

[attachment=19699]

RE: MRslotcar fc130 sidewinder pod MR2114 - Kevan - 1st-Dec-21

Our straight must be 3m or so and the Policar Classic F1's are still accelerating hard at the end of the straight, in fact 80% power is all that's needed so that motor with the right gearing (3.5:1 ish) on a wider car with a bit of ballast should fly round. In fact I may get one of those slimline SW pods and try it in my MRSlotcar Mclaren Thumbup

RE: MRslotcar fc130 sidewinder pod MR2114 - Qman - 1st-Dec-21

(30th-Nov-21, 12:36 PM)Kevan Wrote: I suspect this slimline would...https://www.professormotor.com/product-p/pmtr1532.htm

...Chris can tell you everything you need to know about that motor.

I'm intrigued by this motor, does anyone in the UK stock it?

RE: MRslotcar fc130 sidewinder pod MR2114 - Kevan - 1st-Dec-21

(1st-Dec-21, 12:32 PM)Qman Wrote:
(30th-Nov-21, 12:36 PM)Kevan Wrote: I suspect this slimline would...https://www.professormotor.com/product-p/pmtr1532.htm

...Chris can tell you everything you need to know about that motor.

I'm intrigued by this motor, does anyone in the UK stock it?

Not that I'm aware and I did search over the last year.

RE: MRslotcar fc130 sidewinder pod MR2114 - tatter06 - 1st-Dec-21

(1st-Dec-21, 12:32 PM)Qman Wrote:
(30th-Nov-21, 12:36 PM)Kevan Wrote: I suspect this slimline would...https://www.professormotor.com/product-p/pmtr1532.htm

...Chris can tell you everything you need to know about that motor.

I'm intrigued by this motor, does anyone in the UK stock it?

Doesn't look like it, evotec deliver to the UK, although need to order a decent amount of stuff to justify the postage.

RE: MRslotcar fc130 sidewinder pod MR2114 - chrisguyw - 1st-Dec-21

Hello Tater06,.........if the track you posted is the one you will be running on, I would go for a 25K FC-130,.......it looks marginal for the Policar FF-050.

As far as the FF-050 shown in previous posts, at this stage they are only available from Professor Motor in the US (he ordered them to his spec.)........unlike all FF-050 motors commonly used in our little toy cars, this one has poly neo magnets, which overcome the shortcomings of most FF-050 motors currently on the market.

Cheers
Chris Walker

RE: MRslotcar fc130 sidewinder pod MR2114 - tatter06 - 1st-Dec-21

(1st-Dec-21, 02:09 PM)chrisguyw Wrote: Hello Tater06,.........if the track you posted is the one you will be running on, I would go for a 25K FC-130,.......it looks marginal for the Policar FF-050.

As far as the FF-050 shown in previous posts, at this stage they are only available from Professor Motor in the US (he ordered them to his spec.)........unlike all FF-050 motors commonly used in our little toy cars, this one has poly neo magnets, which overcome the shortcomings of most FF-050 motors currently on the market.

Cheers
Chris Walker

Thanks Chris, yes that's the track