motor mount bracket - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Slot Cars (https://slotracer.online/community/forumdisplay.php?fid=3)
+--- Forum: Scratch Building (https://slotracer.online/community/forumdisplay.php?fid=35)
+--- Thread: motor mount bracket (/showthread.php?tid=2523)

---

RE: motor mount bracket - Fluff - 26th-Oct-21

I might have a crack at that

---

RE: motor mount bracket - OXO cube - 26th-Oct-21

(26th-Oct-21, 08:11 PM)AlexisGaitanis Wrote:  You can always make your own :
https://www.slotforum.com/threads/ecurie-martinis-method-of-making-brackets-with-an-enhancement.183971/#post-2175931

excellent thankyou Alexis
will be trying this out 
what thickness material do you suggest ?
out of curiosity what are the two small holes on the edge of the bracket for ?

Kev

---

RE: motor mount bracket - Qman - 26th-Oct-21

Accuracy would be the biggest problem there, unless you have access to the right equipment, I get Sandy to make mine, it's all CAD based and they come out perfect, saves all the hassle (and swearing)

---

RE: motor mount bracket - AlexisGaitanis - 27th-Oct-21

OXO cube pid='20770' dateline='1635285298']

(26th-Oct-21, 08:11 PM)AlexisGaitanis Wrote:  You can always make your own :
https://www.slotforum.com/threads/ecurie-martinis-method-of-making-brackets-with-an-enhancement.183971/#post-2175931

excellent thankyou Alexis
will be trying this out 
what thickness material do you suggest ?
out of curiosity what are the two small holes on the edge of the bracket for ?

Kev

I use 1mm thick brass sheet for all my chassis and brackets.
As for the 2 holes here is the explanation:
[attachment=19000]

---

RE: motor mount bracket - OXO cube - 27th-Oct-21

(27th-Oct-21, 04:50 AM)AlexisGaitanis Wrote:  I use 1mm thick brass sheet for all my chassis and brackets.
As for the 2 holes here is the explanation:

1mm it is 
thanks Alexis , a picture speaks a thousand words 

Kev

---