Search Results
Work then began on the landscaping by covering the areas along the track with strips of cardboard and chicken wire. This was followed by covering it with paper mache. I used remnants of MDF board for ...
2,370
After a lick of grey wall paint, the track could be tested. A polystyrene tunnel with associated sidewalks followed. I used several colours of wall paint for the tunnel walls. [attachment=34254][atta...
2,370
[attachment=34099][attachment=34100] The first layer of paint.                                                                                                                    Filing the slots for t...
2,370
Here are a few photos more showing how the track construction was made: [attachment=34069][attachment=34070] The tunnel section.                                                                       ...
2,370
[attachment=34001][attachment=34002] Sawing the connecting strips.                                                             The tunnel is the lowest part of the track, so I had to cut a slot in the...
2,370
Hi Leo, The slot is about 10mm deep. A slot has been made in the supports and the connecting strips, as you can see in the photos. [attachment=33999][attachment=34000]
2,370
Shortly after the two basic segments were completed, I decided to add a third intermediate segment, that includes an intersection. The track can be used with both two and three segments. When using th...
2,370
Thanks Kev and Leo, Leo I'm pretty pleased how she runs, I wasn't sure how what the tall thin tyres would be like. But pleasantly surprised. I'm going to try a few different motors to see what the li...
2,638
We have a roller Gents. :wrench: [Video: https://youtu.be/9HpdljrPA5M?si=xbqnfcAku_kEEP8v]
2,638
Hi all, sorry I've not posted in a bit, I've been battling the cold in the garage and waiting on some tools etc to help me make certain things. I could buy more nuts and bolts but I'd rather get more...
2,638
[Image: https://i.imgur.com/vY6JOez.jpg]
147
[attachment=33597]Perhaps a well known “trick”? But I bought artificial golf putting green grass that is 11,5mm tall. Seems to be working very well with Scalextric.
1,859
SO it is a year since I posted any pictures on my track. All the wonderful trees made by Toms Toyota Garage are now installed and with some new cars I thought I would update some pics Firstly a diag...
17,553
Latest update. All landscape shapes are finished. Had to do some final small changes to the track again. Pleased with the idea of having a raised pit area in the centre which creates natural "borders"...
1,859
How it started: It started as a small track consisting of only two segments. [attachment=32934][attachment=32935] Sketching the track on 4mm MDF boards.                                              ...
2,370
Some action in the dark at Slot Rally Hill: [attachment=32919][attachment=32920]
2,370
Hi everyone, Thank you very much for liking it. I really appreciate it. Here is some more information were you can find this track: In the November issue of Slot Car Magazine you can find an article...
2,370
Some more photos of Slot Rally Hill: [attachment=32864][attachment=32865] [attachment=32866][attachment=32867]
2,370
A video of Slot Rally Hill can be found on the Slot Car Magazine Facebook page: https://www.facebook.com/SlotCarMagazine...4770634913 Hub :thumbup:
2,370
Just for fun, here are a few other photos: [attachment=32838][attachment=32839] At one side of the track is a small cottage situated near a bridge. [attachment=32840][attachment=32841] The bridge at...
2,370