Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Info 3d Printed Chassis & Bodies
#21

You got drawers in your loft...  Bigsmile
Quote
#22

We had several requests for replacement wings below is the latest in the range of replacement wings for the Scalex BTCC cars. L-R we have the Mondeo, Luguna, BMW and the Vectra. These are available as a pair on a sprue for £1.50.

   

Cheers
              JMay
[+] 3 members Like JMay's post
Quote
#23

Updates on the CAN AM homage range.
 
DN4 running round the ASSC track
 
   
 
917-10 is now available should have pics soon of a fully painted version  
 
      
917-10 prototype


and next in the CAN AM range is a homage to the Lola T260.Below is the 1st trial print for process, and chassis/parts fit checking. 

   
 
This will be sold with 2 wings so the later version with the front ‘tea tray’ can be built as well.  Included in the kit are the wings, driver and engine trumpets, not included is the front wings supports as these are far too flimsy to be 3d printed to scale, and would suggest that they can be modelled in piano wire if needed. Hoping to have this completed with IL & AW chassis’ options for the boxer motor in the next week or two. All updates on the FB page.

Cheers
          JMay
[+] 2 members Like JMay's post
Quote
#24

Two new BTCC chassis' this week Scalextric MG and VW Passat. Both will be available with either inline or AW integral pod chassis using Boxer or S Can/FC130 motors.  Both have some freelancing on the rear to avoid having to print an upswing in the chassis.
 
   
MG
   

   
VW
   


Details on the FB page.

Cheers
[+] 1 member Likes JMay's post
Quote
#25

Have been redrawing the F1 car in-light of feedback from the Swindon show, with the results below. Added turbo inlets, reprofiled the front and the driver is now printed integrally. The chassis is our flexi pod Boxer (or flat 6) which is shown with a mix of NSR wheels & tyres (rear) and PCS fronts, although the PCS rears can be used they do need the diameter reduced. The body and chassis are available now.

   

   


Details as usual on the FB page.

Cheers JMay.
[+] 2 members Like JMay's post
Quote
#26

£20 for the chassis, body & wing - and competitive with the new NSR F1s... nice work Thumbup
Quote
#27

Latest addition to the range of chassis is for the Scalextric Williams FW007 shown below. Options available for the S can (FC130) or flat 6 motors. Some surgery on the body and gearbox moulding required to get the chassis to sit correctly, and we also offer a replacement rear wing which fits direct to our chassis. 

   


Details as always on the FB page.

Cheers JMay
[+] 1 member Likes JMay's post
Quote
#28

To update on the CAN AM cars,  DN4, Porsche 917-10 & Lola T260, all three cars are now available with a choice of AW or IL chassis’s.

(Pics courtesy of Danny from the Avon Slot car club)

DN 4 supplied with wing, driver and chassis.
 
   

Lola T260 Kit comes with body shell, chassis Driver (shallow tray version not shown) Engine trumpets and two wings. (Note front wing comes without supports these need to be made from Piano wire as shown and held with a suitable slot car bar magnet. )
 
     
 
Porsche 917-10 available now complete with Driver and rear wing.
 
   

More details on the FB page.
 
Cheers JMay
[+] 1 member Likes JMay's post
Quote
#29

Next in the CAN AM series the BRM P154. Below is the shell which comes complete with intake trumpets and a driver figure. Chassis options as per the other CAN AM cars of AW or IL Boxer. Available now details on the FB page or send an IM using this forum.


   

Note: we can also offer transfers for this and the other CAN AM cars in our series.

Cheers
           Jmay
[+] 1 member Likes JMay's post
Quote
#30

Scalex Brabham BT 49 chassis shown with optional replacement spoiler. This will be available once the lockdown finishes in either  S can or Flat 6 IL pod options.


Attached Files Thumbnail(s)
           
[+] 1 member Likes JMay's post
Quote


Forum Jump:


Users browsing this thread: 1 Guest(s)