25th-May-25, 06:50 PM
Australian V8 wing set
Over the last few years I have created and printed various wings for the Australian V8 cars mostly for a local club that races the V8s. Below is this collection in two sets of STL files containing 10 off wings for various V8 cars as identified below.
There is no support structures in the files just the wings themselves, so can be adapted for either resin or FDM filament printers as required.
For FDM printing most of the files will sit flat on the bed using the trailing wing edge, the curved wings will need supports added in the slicer or custom supports in CAD.
Cheers
John
Over the last few years I have created and printed various wings for the Australian V8 cars mostly for a local club that races the V8s. Below is this collection in two sets of STL files containing 10 off wings for various V8 cars as identified below.
There is no support structures in the files just the wings themselves, so can be adapted for either resin or FDM filament printers as required.
For FDM printing most of the files will sit flat on the bed using the trailing wing edge, the curved wings will need supports added in the slicer or custom supports in CAD.
Cheers
John
Mr Fit for Function.
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)
