Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Spray Booth Turntable
#1

Spray Booth Turntable

For years I have been using a wooden block turntable shown below for spraying car shells. The shells locate over the block and hold using Blu Tak, which can be a pain to get right due to shell variations and a fixed block, and sometimes somebody has borrowed the blue tak.

   

So high time I made something better,

   

This consists of a base with a spindle going to a pegboard plate which takes pegs to hold the shell. On two of the pegs are eccentric cams which can be rotated to touch the shell side to side to stop side movement.


   


Parts shown above, the spindle shown orange glues into the pegboard green, and then rotates in the base red. The base can be screwed to a larger wood block for extra stability via the 4 fixing holes. Parts printed in PLA at 20% fill 0.2mm layers.


.stl Turntable 4.stl Size: 3.09 MB  Downloads: 1


Cheers
John.

Mr Fit for Function.
[+] 9 members Like JMay's post
Quote
#2

A nice elegant solution which beats my carpet tape folded back on itself stuck on the top of a bottle of drain cleaner Bigsmile

Life is like a box of Slot cars... Cool Drinkingcheers
Quote
#3

Very useful and a free STL, thank you kind sir :)
Quote


Forum Jump:


Users browsing this thread: 1 Guest(s)