Search Results
Hi Anthony,                  Yes have a chassis for the SRC RS Capri (IL boxer or  S can), and for the Slot classic chassis, wood or plastic guides (i have a range which can be adapted to suit). Chee...
49,970
Must admit Kevan,  I do like race versions of muscle cars.  One I did earlier [attachment=28249] Camaro (more of a street rod) And one awaiting attention (thinking GTY like the Carrera one).  [att...
3DP
10,865
Current work in progress during the winter months, a Datsun 240z IMSA and Honda Integra Type R BTTC which started off as STL files of road going cars then given a cut & shut treatment to add new c...
3DP
10,865
Been fed up chasing tools around the desk or from a tray/drawer, so created a tool rack as shown, which screws to the underside of the shelf that runs over my desk in the Summerhouse. The rack has a v...
3DP
184
Here is the STL file for the trigger controller rest highlighted in the recent review by Anthony. https://slotracer.online/community/showt...p?tid=3407 [attachment=27674] Rest can be mounted either...
3DP
258
Winter project. Long wheel base Tuc Tuc Taxi, SW pod, printed shell in 2 halves, wheels & front tyre (TPU) with guide mounted behind the front wheel inside the tub.  Thinking from my own experie...
3DP
10,865
Ninco 1/28 Xlot chassis for the Porsche 911. Ideal for resurrecting the 1/28 shells where the Ninco spares are becoming difficult to obtain (in the UK). Note: the BRM 1/24 range of axles, wheels &...
49,970
Further addition to the Australian V8 wing range the Commodore VF. [attachment=27055] IM on FB or Slotracer for details.  Cheers               JMay
49,970
Oh dear,               Just to satisfy the 3d printing experts, have amended my post to include the word 'clone' which if you follow the context of the post was the intention when I wrote the post 19 ...
3DP
4,183
I had a collection of Ninco boxes which I turned upside down and placed into a diy MDF shelf cabinet with the old Scalex threaded brass car retainers as knobs to pull them out. Makes a useful spares c...
443
Australian V8 Wings. [attachment=25443] And the VE wing fitted to the car. [attachment=25442] Available in rigid and some options for flexible, IM on FB or SlotRacer for details.  Cheers         ...
49,970
Like dabbling with the later era CAN AM cars as these are easier to draw than the earlier cars with the flowing curves in 3 planes. Below is a dabbling exercise from a while ago to look at drawing a L...
3DP
10,865
Kev,        I can supply a 3dp front axle holder to take a solid axle which will clip into the original Scalex junior body as below, and will take an NSR blade guide.  [attachment=25090] [attachment...
872
Savage GT, Scalex Wood guide blades are 22mm long, 1.8mm thick and 8mm depth from the underside of the braid face and a pound each. IM either here on SlotRacer or over on the FB messenger. Cheers  ...
49,970
Nope not nylon,  Carbon fibre PLA or I can do them in PETG. Cheers              JMay
49,970
Some new guides to go with the VIP & MRRC guides. [attachment=24565] These fit the modern Scalex cars as shown here fitted to a Honda Civic. [attachment=24566] Guides have the centralising bos...
49,970
More dabbling with the 1/24 F3 car has evolved into the MK4, where I have removed part of the rear body work to add engine and gearbox detail. Chassis is similar to the MK2 chassis for IL boxer in a 3...
49,970
To go with the MK1 (orange F3) now have a MK2 version as below. (See previous post on page 7). [attachment=23235] The MK2 has the same chassis with the exception that the front wheels due to the lo...
49,970
For a variety of reasons been on a shut down in Q1 of this year, but slowly ramping back up now, and the designs I have been dabbling with are now getting to be printed and finished off. Below is a 19...
49,970
Been playing with TPU filament which for those not aware is a flexible rubber type filament which can be used for printing mobile phone holders and other flexible items, and with some patience front t...
3DP
10,865