Search Results
Work then began on the landscaping by covering the areas along the track with strips of cardboard and chicken wire. This was followed by covering it with paper mache. I used remnants of MDF board for ...
2,359
After a lick of grey wall paint, the track could be tested. A polystyrene tunnel with associated sidewalks followed. I used several colours of wall paint for the tunnel walls. [attachment=34254][atta...
2,359
Hi Kev, Thank you for liking the info. The tile adhesive fixes at one side the braids ( the opposite side of the slot). They are also flexibly attached to the track from below by the use of double-si...
2,359
You're right. There are many small deviations, which together detract from the similarity with the real car, which is a shame.
175
Before the tile adhesive can be applied, the braids and slots are covered with masking tape: [attachment=34222][attachment=34223] [attachment=34224][attachment=34225] The painting of the track surfa...
2,359
I like Avant Slot's choice of the Nissan 240 RS and especially Terry Kaby's car, but it looks so strange in the photos. In my opinion is the area of the nose in front of the front wheels too large and...
175
Here are some photos of the making of the intersection. It is recommended to apply a drop of superglue under the braids on the MDF track right next to the slits. This prevents the connection between t...
2,359
[attachment=34099][attachment=34100] The first layer of paint.                                                                                                                    Filing the slots for t...
2,359
Hi Stuart, The inside of the rim is about 11.95-12.00mm. The outside of the insert will be 11.95mm or maybe less. I've measured the rims of the Jimmy McRae and the Vatanen Manta 400. Hub :thumbup: ...
121
Here are a few photos more showing how the track construction was made: [attachment=34069][attachment=34070] The tunnel section.                                                                       ...
2,359
[attachment=34001][attachment=34002] Sawing the connecting strips.                                                             The tunnel is the lowest part of the track, so I had to cut a slot in the...
2,359
Hi Leo, The slot is about 10mm deep. A slot has been made in the supports and the connecting strips, as you can see in the photos. [attachment=33999][attachment=34000]
2,359
Shortly after the two basic segments were completed, I decided to add a third intermediate segment, that includes an intersection. The track can be used with both two and three segments. When using th...
2,359
Amazing scenery in the model photos. Thanks for posting. :thumbup:
75,019
SRC has now launched the Porsche 914/6 GT RALLYSLOT LEGENDS 2023. It is a white painted lightweight Chrono version of the Porsche. If the car is used for competition, it is recommended, according to ...
153
Just for fun, a photo of each of Ron's two painted rally spectator sets: (They are the same. Only painted in different colours) [attachment=33736][attachment=33737]
27,537
Thank you for liking, Jason. :thumbup: The jeans is painted with enamel paint. After drying, I applied a layer of mostly white paint diluted with cleaning spirit. The trick is to quickly distribute t...
27,537
Thank you Fluff. :thumbup: The only critical part to paint was the umbrella between his knees. Maybe you wouldn't expect it, but the most difficult figure in the set is the photographer in the red ja...
27,537
Hi Ron, I am not finished yet. First a second set needs to be painted. The result will be shown here. Hub :thumbup: [attachment=33650][attachment=33651]
27,537
Ron's rally spectator set is now ready. The two men sitting in the folding chairs were not as difficult to paint as expected. Ron's spectator set is also very useful on a race track. [attachment=3363...
27,537