SlotRacer Forum
My first 3dp print - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: 3D Printing (https://slotracer.online/community/forumdisplay.php?fid=56)
+--- Forum: 3DP (https://slotracer.online/community/forumdisplay.php?fid=57)
+--- Thread: My first 3dp print (/showthread.php?tid=604)

Pages: 1 2 3 4 5


My first 3dp print - AlexisGaitanis - 17th-Jul-19

An Ender 3 printer has just arrived and i put to test one of my first designs front axle blocks that allow adjustment of ride height for cars that have snap fit bushings in front,the original design and the print
[attachment=2666][attachment=2667]


RE: My first 3dp print - Scuderia_Turini - 17th-Jul-19

Clever idea Alexis !

Leo


RE: My first 3dp print - AlexisGaitanis - 2nd-Aug-19

Next prints,a multi cavity mould for IPS control tyres[Image: 67527760_10217295375890388_6166210059249...e=5DABA057]

It is not what i expected I will have to start over

And a guide ,i am happy with the print remains to see if it works as expected on track

[Image: 67729858_10217295375930389_8579771299218...e=5DE1E932]


RE: My first 3dp print - AlexisGaitanis - 23rd-Aug-19

Chassis for the Revell Ferrari 360 Easykit,design and print:
[Image: 68917704_10217450010476156_9070540835421...e=5DD68D3C]

[Image: 69023490_10217450011636185_2935491811877...e=5DD07D8F]

[Image: 69498103_10217450011876191_9005222994259...e=5E12815E]


RE: My first 3dp print - Scuderia_Turini - 24th-Aug-19

Excellent stuff Alexis,  the design aspect is a big achievement  (printing is easy-sh).

Leo


RE: My first 3dp print - AlexisGaitanis - 10th-Sep-19

Next project  , chassis for  OPEL ASTRA DTM Revell easykit
[Image: 69853285_10217597448922025_5626339030988...e=5DF9BB22]
[Image: 70183662_10217597448962026_7184622306361...e=5E01E83A]
[Image: 69782025_10217597568085004_4133042605124...e=5E10C72B]


RE: My first 3dp print - Anthony B - 11th-Sep-19

Really nice work alexis!!!

What printer and software are you using??


RE: My first 3dp print - AlexisGaitanis - 12th-Sep-19

Printer is Ender 3, software is FreeCad,Blender,Inkscape and Ultimaker


RE: My first 3dp print - Anthony B - 12th-Sep-19

Alex - honest question here - why you making chassis for cars that are 15+ old - not even sure you can get those bodies in the sgop anymore.

I would have LOVED your chassis at the time the bodies came out Bigsmile


RE: My first 3dp print - AlexisGaitanis - 12th-Sep-19

]I have several of these kits (all the DTMs and all the Subarus and Citroens and all the Ferraris ,some of them more than one copy,some ofthem modified to slot cars using the original chassis) in my to do cabinet and they dont stand  a chance of geting a brass chassis and they offer a good training basis as because of the side air inlets they have a degree of difficulty .What i  am trying to do is make reusable sketches making  chassis  design easier.It works so far.
Photo of the chassis that the 3dp one is going to replace
[attachment=3575