How to paint a car... - Printable Version

How to paint a car... - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Slot Cars (https://slotracer.online/community/forumdisplay.php?fid=3)
+--- Forum: 1:32 Scale (https://slotracer.online/community/forumdisplay.php?fid=4)
+--- Thread: How to paint a car... (/showthread.php?tid=4434)

How to paint a car... - fotodoug2 - 31st-Jul-24

...without paint? I'm going to try...stay tuned!

RE: How to paint a car... - KensRedZed - 31st-Jul-24

I've lined my Mickey Mouse cap that I'm wearing with aluminum foil, and hooked it up to a 9V battery for amplification.

Painting without paint? I'm all ears you might say. Thumbup

RE: How to paint a car... - fotodoug2 - 31st-Jul-24

Well, don't get too excited. I decided I would try the vinyl wrap method...it looks so good on real cars! Who would have thought the vinyl would be so thick? I guess everyone but ME!!! I haven't given up yet, but it sure has limits. Tappingfoot

RE: How to paint a car... - chrisguyw - 31st-Jul-24

Hello Doug,.....as an option to vinyl wrap, you could look at Hydrographic Film dipping,............the process has been used on slot bodies for several years now, and compared to vinyl wraps, the benefits are many..............1/Much easier (read quite foolproof) ,...2/ very thin, will not hide body details/shut lines,...3/ lots and lots of patterns/designs,...4/ quite reasonable at roughly $3 to 4 per car.

Cheers
Chris Walker

RE: How to paint a car... - KensRedZed - 1st-Aug-24

Just out of curiosity. Don't you need to use heat to shape the vinyl wrap over the various contours and compound curves? Like, enough heat to possibly damage/deform the plastic body?

I honestly don't know.

RE: How to paint a car... - fotodoug2 - 1st-Aug-24

Thanks Chris...I've never heard of that before...trying to find someone in Vancouver!

RE: How to paint a car... - Kevan - 1st-Aug-24

Hydrofilm (aka hydro dipping)...not the best photo as this was on my old phone a couple of years ago taken late in the evening without decent light...(that's the excuses out of the way)

[attachment=36533]
[attachment=36534]

There's more designs than you could think possible.

Hydrofilm comes on rolls but you can buy A4 sized 'samples' that are big enough to get two cars out of.

After a couple of other cars after this one I realised the best method was to put sellotape all round the edge of the film as a 'frame' as the film spreads as the backing solvent melts away.

Here's my notes on the envelope holding some film I have:

sellotape edges to stop it spreading
sticky side down (usually shiny side) test with a wet finger on a corner of the sheet
water at 32°C
let it soak for a minute until creases are gone and it's a flat film
apply activator spray, one or two passes so the surface is shiny (activator is NASTY STUFF...use a well ventilated area)
wait 10 seconds
dip

RE: How to paint a car... - fotodoug2 - 3rd-Aug-24

Well, not very good news as far as painting without paint. I think it could work if you could find vinyl thin enough, and work pretty well! I couldn't, and it didn't! I think the title of this should be "Good from far, but far from good!".
[Image: Nk6vokl.jpg]

RE: How to paint a car... - Tibbs - 8th-Aug-24

(1st-Aug-24, 02:07 AM)KensRedZed Wrote: Just out of curiosity. Don't you need to use heat to shape the vinyl wrap over the various contours and compound curves? Like, enough heat to possibly damage/deform the plastic body?

I honestly don't know.

Your bang on Ken, to give the vinyl wrap it's new memory, it needs to be heated to 100 degrees.
I've worked in the sign industry all my life and personally I'd choose paint over wrap any day, you get scratches in vinyl it needs a panel replaced which could be large or small. Paint can be feathered in.
Each to their own though Thumbup

RE: How to paint a car... - KensRedZed - 9th-Aug-24

Thank you very kindly for the explanation Tony. Thumbup