Alfa Romeo Giulietta family has a new member - Printable Version
+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: 3D Printing (https://slotracer.online/community/forumdisplay.php?fid=56)
+--- Forum: 3DP (https://slotracer.online/community/forumdisplay.php?fid=57)
+--- Thread: Alfa Romeo Giulietta family has a new member (/showthread.php?tid=3284)
+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: 3D Printing (https://slotracer.online/community/forumdisplay.php?fid=56)
+--- Forum: 3DP (https://slotracer.online/community/forumdisplay.php?fid=57)
+--- Thread: Alfa Romeo Giulietta family has a new member (/showthread.php?tid=3284)
Alfa Romeo Giulietta family has a new member - AlexisGaitanis - 9th-Oct-22
From left ,sedan(3dp resin body and chassis),sprint veloce(Ocar body scratchbnuilt chassis),duetto(3dp fdm body and chassis),sprint speciale(John Warren body,scratchbuilt front engine chassis)
![[Image: img20221009095425_00-jpg.321590]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/img20221009095425_00-jpg.321590/)
and the chassis
![[Image: img20221009095506_00-jpg.321591]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/img20221009095506_00-jpg.321591/)
![[Image: 20200421_085822-jpg.321592]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/20200421_085822-jpg.321592/)
![[Image: 20200421_085809-jpg.321593]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/20200421_085809-jpg.321593/)
![[Image: img20211105154731_00-jpg.321597]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/img20211105154731_00-jpg.321597/)
![[Image: 20180206_090650-jpg.321596]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/20180206_090650-jpg.321596/)
![[Image: 20180206_090708-jpg.321595]](https://www.slotforum.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.slotforum.com/attachments/20180206_090708-jpg.321595/)
Attachments
RE: Alfa Romeo Giulietta family has a new member - Kevan - 9th-Oct-22
If that was my resin printed chassis and pod I would have sanded the bottom on a flat surface...or printed them straight onto the plate rather than on supports.